Traffic sign recognition on Fiesta MK8 >2017

Car configuration discussions and experience sharing
XE-POR
Posts: 6
Joined: Tue Jun 09, 2020 6:39 am
Vehicle: Mazda 3, LF17 2.0, 150, 2006

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by XE-POR » Sat Jun 13, 2020 7:33 am

hello,roylion15

I have a 2020 focus st line.. Got the values to change in ipma built but when I change them I get service procedure interrupted and no values change. I can PM my Vin ?
Sorry, my English is not good!thanks!

XE-POR
Posts: 6
Joined: Tue Jun 09, 2020 6:39 am
Vehicle: Mazda 3, LF17 2.0, 150, 2006

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by XE-POR » Sat Jun 13, 2020 7:34 am

I had the same problem :cry:

roylion15
Posts: 179
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by roylion15 » Sat Jun 13, 2020 8:53 am

@imtheju99ernaut
is your IPMA, "H1BT-19H406-AE" part number ?
@XE-POR
topic here is for fiesta mk8, there is another topic for the focus MK4.

Both can send VIN in PM.
No support in PM without invitation, please !

neutron2k
Posts: 35
Joined: Wed May 27, 2020 3:14 pm
Vehicle: Ford Focus MK4 1.0 125 Ecoboost 2018

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by neutron2k » Sat Jun 13, 2020 9:17 am

Hi @roylion15

Would you mind helping me as well? Would like to add Traffic Sign Recognition if possible.
I started another thread not realising this thread had focus info in it!

I have speed sign detection at present and monochrome IPC. IPMA is JX7T-19H406-CF

Cheers!

XE-POR
Posts: 6
Joined: Tue Jun 09, 2020 6:39 am
Vehicle: Mazda 3, LF17 2.0, 150, 2006

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by XE-POR » Sat Jun 13, 2020 10:34 am

roylion15 wrote:
Sat Jun 13, 2020 8:53 am
@imtheju99ernaut
is your IPMA, "H1BT-19H406-AE" part number ?
@XE-POR
topic here is for fiesta mk8, there is another topic for the focus MK4.

Both can send VIN in PM.
2020 mk4 STline

IPMA - Image Processing Module A
Part number: JX7T-19H406-DB
Strategy : JX7T-14F397-AJ
Calibration: JX7T-14F398-CB

imtheju99ernaut
Posts: 3
Joined: Fri Jun 12, 2020 9:16 am
Vehicle: ford fiesta st2 1.5 200bhp 2018

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by imtheju99ernaut » Sat Jun 13, 2020 1:39 pm

roylion15 wrote:
Sat Jun 13, 2020 8:53 am
@imtheju99ernaut
is your IPMA, "H1BT-19H406-AE" part number ?
@XE-POR
topic here is for fiesta mk8, there is another topic for the focus MK4.

Both can send VIN in PM.
Hi roylion my original camera was an ae I’m sure it’s now bd. I can go get the full part number later on if needed.

roylion15
Posts: 179
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by roylion15 » Sat Jun 13, 2020 10:40 pm

Hello
Yes, give me the good part number of the installed cam if it’s not coming from factory, please ...
Thanks
No support in PM without invitation, please !

imtheju99ernaut
Posts: 3
Joined: Fri Jun 12, 2020 9:16 am
Vehicle: ford fiesta st2 1.5 200bhp 2018

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by imtheju99ernaut » Wed Jun 17, 2020 7:11 pm

Sorry I haven’t replied I have been away working (truck driver) just bad yesterday.

The number on my camera is H1BT-19H406-BD

Now this is the strange part, I have managed to get auto high beam to work by going into to menus on forscan. I enabled auto high beam for the headlights and also for each side. Only issue is I don’t have it in the cars menu, the icon automatically comes on when it’s dark, I have only had it come on once so not sure if it working as normally yet. I should get a better chance to check it over the weekend.

roylion15
Posts: 179
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by roylion15 » Thu Jun 18, 2020 1:16 pm

For AHB ...
need to be enabled in IPMA, SCCM, BCM and IPC
IN IPC to obtain the menu and the AHB light indicator , it's on the first line ....
exemple for a fiesta IPC
720-01-01
0C4A 3464 20 > 0C4E 3464 22
stock xxxX xxxx xY >

X add 4 ( add the AHB menu in vehicle /settings /lighs IPC )
Y add 2 ( AHB light indicator IPC )

As the example
X= A > E
Y= 0 > 2
No support in PM without invitation, please !

CoD21
Posts: 11
Joined: Wed May 13, 2020 8:56 am
Vehicle: Ford Fiesta MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by CoD21 » Wed Jul 01, 2020 8:26 am

can i use a "L1BT-19H406-BE"-camera for tsr an ahb for my fiesta? my dealer says its from another fiesta

Post Reply