ELM327 with fiat blue adaptor

Discussion about adapters and connections - usage, problems, solutions
Post Reply
Posts: 1
Joined: Mon May 13, 2019 7:52 pm
Vehicle: Fiesta 1.6 petrol Titanium 2010

ELM327 with fiat blue adaptor

Post by Reddevilhome » Tue May 14, 2019 4:22 am

Good morning FORScan community.

I attempted to dabble with this a year or so ago but after buying a cheap ELM327 and taking the time to modify it with the switch it would read a few modules then cause issues and not connect etc.

I went away and forgot about it all. I have recently had issues with my FIAT and in doing so purchased a better quality ELM327 which has worked fine on the FIAT, having connected it to the fiesta it appears to work but before I take to modifying it would the blue adaptor cable you can buy for the FIAT modules work instead? This appears to swap the correct pins over and would prevent a possible problem while modding the working ELM327.

Thanks in advance

Richard (noob)

Fiesta 1.6 Petrol (Titanium) 2010

Post Reply