Programming Rain Sensing Wipers Fiesta MK8

Car configuration discussions and experience sharing
Post Reply
LipeGTi
Posts: 2
Joined: Mon Apr 15, 2019 9:51 pm
Vehicle: Ford Fiesta 1.0 EcoBoost

Programming Rain Sensing Wipers Fiesta MK8

Post by LipeGTi » Tue Apr 16, 2019 7:39 pm

Hello

After several attempts, I still have not figured out how to turn on the rain sensor on my Fiesta MK8.

With ForScan I've already been able to put it in the on-board computer for activation, and the brushes turn on.
But then I pour water towards the sensor, and they do not react anymore.

Does anyone have any ideas, or have you already done this?

Thank you

davetcollection
Posts: 21
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: Programming Rain Sensing Wipers Fiesta MK8

Post by davetcollection » Wed Apr 17, 2019 7:02 am

I know this may sound daft, but have you put the wipers into intermittent mode?

LipeGTi
Posts: 2
Joined: Mon Apr 15, 2019 9:51 pm
Vehicle: Ford Fiesta 1.0 EcoBoost

Re: Programming Rain Sensing Wipers Fiesta MK8

Post by LipeGTi » Wed Apr 17, 2019 4:26 pm

Exactly!

After activating the rain sensor on the on-board computer, I set the windscreen wiper blinking.

I'll check if the car is fusible at position 73, from which it feeds the sensor.
But starting from the principle that should have, since the rain sensor is the same as the lights. ;)

Post Reply