Ford Fusion 2010 SEL faults

Share your FORScan experience with other users
Post Reply
VanDeursen
Posts: 4
Joined: Tue Jan 22, 2019 12:15 am
Vehicle: Ford Fusion

Ford Fusion 2010 SEL faults

Post by VanDeursen » Thu Apr 04, 2019 2:25 pm

Dear all,

My wife owns a Ford Fusion 2010 SEL already quite some time even from before we met.
Now this car is full with things... And we are solving them one by one.

Here is the log.

Code: Select all

==PCM DTC P0060:00-EC===
Code: P0060 - HO2S Heater Resistance (Bank 2, Sensor 2)

Status: 
 - DTC Maturing - Intermittent at Time of Request
 - Malfunction Indicator Lamp is On for this DTC
 - Test not complete

Module: Powertrain Control Module

===END PCM DTC P0060:00-EC===

===PCM DTC P0130:00-E8===
Code: P0130 - O2 Sensor Circuit (Bank 1 Sensor 1)

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC
 - Test not complete

Module: Powertrain Control Module

===END PCM DTC P0130:00-E8===

===PCM DTC P0325:00-68===
Code: P0325 - Knock/Combustion Vibration Sensor 1 Circuit (Bank 1)

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC
 - Test not complete

Module: Powertrain Control Module

===END PCM DTC P0325:00-68===

===PCM DTC P0625:00-E8===
Code: P0625 - Generator Field/F Terminal Circuit Low

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC
 - Test not complete

Module: Powertrain Control Module

===END PCM DTC P0625:00-E8===

===PCM DTC P1000:00-2B===
Code: P1000 - OBD Systems Readiness Test Not Complete

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

===END PCM DTC P1000:00-2B===

===OBDII DTC P0060-C===
Code: P0060 - HO2S Heater Resistance (Bank 2, Sensor 2)

Status: 
 - Confirmed - malfunction is confirmed 

Module: On Board Diagnostic II

===END OBDII DTC P0060-C===

===OCS DTC None===
Successful DTC reading, no error codes found

Module: Occupant Classification System Module

===END OCS DTC None===

===RCM DTC None===
Successful DTC reading, no error codes found

Module: Restraint Control Module

===END RCM DTC None===

===PSCM DTC U3003:68-08===
Code: U3003 - Battery Voltage

Additional Fault Symptom:
 - Event Information

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Power Steering Control Module

 Freeze Frame :
-SWRS: 0 rev/min - Steering Wheel Rotation Speed
-SW_ANGLE: -350.00 ° - Steering Wheel Angle
===END PSCM DTC U3003:68-08===

===IPC DTC U0161:00-08===
Code: U0161 - Lost Communication With Compass Module

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Instrument Panel Control Module

===END IPC DTC U0161:00-08===

===ABS DTC B1342-E0===
Code: B1342 - ECU internal fault

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Antilock braking system

Diagnostic Trouble Code details

ECU internal fault

===END ABS DTC B1342-E0===

===ABS DTC C1175-20===
Code: C1175 - Left Rear Wheel Speed Sensor Input Circuit Failure

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Antilock braking system

Diagnostic Trouble Code details

Left Rear Wheel Speed Sensor Input Circuit Failure

Sensor

Short circuit

Open circuit

Sensor Previously disconnected.

This DTC may be caused by :

Damaged or contaminated connector

===END ABS DTC C1175-20===

===ABS DTC C1155-20===
Code: C1155 - Left Front Wheel Speed Sensor Input Circuit Failure

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Antilock braking system

Diagnostic Trouble Code details

Left Front Wheel Speed Sensor Input Circuit Failure

This DTC may be caused by :

Sensor

Short circuit

Open circuit

Sensor Previously disconnected.

Damaged or contaminated connector

===END ABS DTC C1155-20===

===ABS DTC C1145-20===
Code: C1145 - Right Front Wheel Speed Sensor Input Circuit Failure

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Antilock braking system

Diagnostic Trouble Code details

Right Front Wheel Speed Sensor Input Circuit Failure

This DTC may be caused by :

Sensor

Short circuit

Sensor Previously disconnected.

Open circuit

Damaged or contaminated connector

===END ABS DTC C1145-20===

===ABS DTC C1165-20===
Code: C1165 - Right Rear Wheel Speed Sensor Input Circuit Failure

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Antilock braking system

Diagnostic Trouble Code details

Right Rear Wheel Speed Sensor Input Circuit Failure

This DTC may be caused by :

Sensor

Short circuit

Open circuit

Sensor Previously disconnected.

Damaged or contaminated connector

===END ABS DTC C1165-20===

===DSP DTC U0197:00-0A===
Code: U0197 - Lost Communication With Telephone Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: (Audio) Digital Signal Processing Module

===END DSP DTC U0197:00-0A===

===HVAC DTC None===
Successful DTC reading, no error codes found

Module: Heating Ventilation Air Conditioning

===END HVAC DTC None===

===GPSM DTC U0423:00-88===
Code: U0423 - Invalid Data Received from Instrument Panel Cluster Control Module

Status: 
 - Previously Set DTC - Not Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Global Positioning System Module

===END GPSM DTC U0423:00-88===

===FCIM DTC None===
Successful DTC reading, no error codes found

Module: Front Controls Interface Module

===END FCIM DTC None===

===FDIM DTC U0197-60===
Code: U0197 - Lost Communication With Telephone Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Front Display Interface Module

===END FDIM DTC U0197-60===

===PAM DTC None===
Successful DTC reading, no error codes found

Module: Parking Aid Module

===END PAM DTC None===

===ACM DTC U0197-60===
Code: U0197 - Lost Communication With Telephone Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Audio Control Module

===END ACM DTC U0197-60===

===GEM/SJB DTC B2872-E0===
Code: B2872 - Tire Pressure Sensor Fault

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Generic Electronic Module / Smart Junction Box

Diagnostic Trouble Code details

Tire Pressure Sensor Fault

This DTC indicates the module is not receiving data from one, two, or three of the TPMS sensors. Possible causes include sensor(s) programmed to the module are no longer present or no longer functioning. Make sure there are operating sensors in the wheels and they are trained to the module.

In rare cases, this DTC can be set by radio frequency interference with consumer electronics. Cell phone chargers, power converters and power supplies have been found to be likely candidates.

===END GEM/SJB DTC B2872-E0===
- On the moment the HO2S sensor will be replaced.
- The tire pressure sensor TPMS rear left is also replaced but we can't erase or connect the sensor to the system by the program. If someone have an idea please? Or this goes automatically?

- ABS i guess this complete module need to be replace?
- Generator Field/F Terminal, the alternator what isn't good?

- Phone module is also kind of weird...

If someone can give advice please?

VanDeursen
Posts: 4
Joined: Tue Jan 22, 2019 12:15 am
Vehicle: Ford Fusion

Re: Ford Fusion 2010 SEL faults

Post by VanDeursen » Sun Jul 07, 2019 5:44 pm

I mean time I exchanged H02S sensor Bank 1 & 2, the knocking sensor was loose (fixed), replaced the fan blower ecu with a new one.
Still need to replace the ABS electronic module and alternator. And the TPMS need to be reset (struggeling link)
log currently is already more clear.

Code: Select all

===PCM DTC P0625:00-D0===
Code: P0625 - Generator Field/F Terminal Circuit Low

Status: 
 - Malfunction Indicator Lamp is On for this DTC
 - Test not complete

Module: Powertrain Control Module

===END PCM DTC P0625:00-D0===

===PCM DTC P1000:00-2B===
Code: P1000 - OBD Systems Readiness Test Not Complete

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

===END PCM DTC P1000:00-2B===

===OBDII DTC None===
Successful DTC reading, no error codes found

Module: On Board Diagnostic II

===END OBDII DTC None===

===OCS DTC None===
Successful DTC reading, no error codes found

Module: Occupant Classification System Module

===END OCS DTC None===

===RCM DTC None===
Successful DTC reading, no error codes found

Module: Restraint Control Module

===END RCM DTC None===

===PSCM DTC None===
Successful DTC reading, no error codes found

Module: Power Steering Control Module

===END PSCM DTC None===

===IPC DTC None===
Successful DTC reading, no error codes found

Module: Instrument Panel Control Module

===END IPC DTC None===

===ABS DTC B1342-E0===
Code: B1342 - ECU internal fault

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Antilock braking system

Diagnostic Trouble Code details

ECU internal fault

===END ABS DTC B1342-E0===

===DSP DTC U0197:00-0A===
Code: U0197 - Lost Communication With Telephone Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: (Audio) Digital Signal Processing Module

===END DSP DTC U0197:00-0A===

===HVAC DTC None===
Successful DTC reading, no error codes found

Module: Heating Ventilation Air Conditioning

===END HVAC DTC None===

===GPSM DTC None===
Successful DTC reading, no error codes found

Module: Global Positioning System Module

===END GPSM DTC None===

===FCIM DTC None===
Successful DTC reading, no error codes found

Module: Front Controls Interface Module

===END FCIM DTC None===

===FDIM DTC U0197-60===
Code: U0197 - Lost Communication With Telephone Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Front Display Interface Module

===END FDIM DTC U0197-60===

===PAM DTC None===
Successful DTC reading, no error codes found

Module: Parking Aid Module

===END PAM DTC None===

===ACM DTC U0197-60===
Code: U0197 - Lost Communication With Telephone Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Audio Control Module

===END ACM DTC U0197-60===

===GEM/SJB DTC B2872-E0===
Code: B2872 - Tire Pressure Sensor Fault

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Generic Electronic Module / Smart Junction Box

Diagnostic Trouble Code details

Tire Pressure Sensor Fault

This DTC indicates the module is not receiving data from one, two, or three of the TPMS sensors. Possible causes include sensor(s) programmed to the module are no longer present or no longer functioning. Make sure there are operating sensors in the wheels and they are trained to the module.

In rare cases, this DTC can be set by radio frequency interference with consumer electronics. Cell phone chargers, power converters and power supplies have been found to be likely candidates.

===END GEM/SJB DTC B2872-E0===

Post Reply