Remove Sync 2 drive restrictions

Car configuration discussions and experience sharing
Post Reply
ev.angelopoulos
Posts: 2
Joined: Fri Dec 07, 2018 7:52 pm
Vehicle: mondeo, 1.6tdci, 2016

Remove Sync 2 drive restrictions

Post by ev.angelopoulos » Tue Feb 12, 2019 11:37 am

Hello,
Does anyone knows how we can remove drive restrisctions from sync 2 (ver 3.08) while the vehicle is in motion?

Thanks in advance

lenko
Posts: 55
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2.0 Ecoboost

Re: Remove Sync 2 drive restrictions

Post by lenko » Wed Feb 13, 2019 3:25 pm

ev.angelopoulos wrote:
Tue Feb 12, 2019 11:37 am
Hello,
Does anyone knows how we can remove drive restrisctions from sync 2 (ver 3.08) while the vehicle is in motion?

Thanks in advance
In the latest Forscan there's a setting in either BCM or IPC where you can just turn it on.

lenko
Posts: 55
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2.0 Ecoboost

Re: Remove Sync 2 drive restrictions

Post by lenko » Wed Feb 13, 2019 8:06 pm

Here is the setting. The very top one: download/file.php?mode=view&id=3875
Attachments
Untitled.jpg
Untitled.jpg (45.12 KiB) Viewed 63 times

ev.angelopoulos
Posts: 2
Joined: Fri Dec 07, 2018 7:52 pm
Vehicle: mondeo, 1.6tdci, 2016

Re: Remove Sync 2 drive restrictions

Post by ev.angelopoulos » Thu Feb 14, 2019 8:38 am

Hello,
I mean the video restrictions for av input, to connect a dvb-t receiver while the vehicle is in motion. Not the settings for the rear camera.

Thanks in advance

Post Reply