2010 F250 Superduty Hyperflashing Turn Signals

Any issues related to FORScan application
Post Reply
bhillh193
Posts: 1
Joined: Fri Jan 11, 2019 6:45 pm
Vehicle: F250, Diesel, 6.4, 2010

2010 F250 Superduty Hyperflashing Turn Signals

Post by bhillh193 » Sat Jan 12, 2019 5:25 pm

I recently changed out my original turn signal lamps to LED. Now I'm getting hyperflash. I was told that I could program this out but I can't figure out how. Supposedly there is a module relay that I can swap out but I can't find that thing either. I've torn my dash apart and can not find the location of the relay. This hyperflash is really annoying. Any help would be appreciated.

bobbysto@yadtel.net
Posts: 1
Joined: Tue Nov 13, 2018 2:16 am
Vehicle: 2014 ford f250 6.7 super duity

Re: 2010 F250 Superduty Hyperflashing Turn Signals

Post by bobbysto@yadtel.net » Sat Jan 12, 2019 6:47 pm

I don't think you can program that out , the hyper flash is used to let you know that you have a burned out turn signal light . There is not enough current draw with LED,s so you need to install a load resister you can get from auto parts store or you can find them on Amazon there easy to install but you need to remember that they do get hot and that will stop you're hyper flash.

Post Reply