Any issues related to FORScan application
2 posts • Page 1 of 1
I recently changed out my original turn signal lamps to LED. Now I'm getting hyperflash. I was told that I could program this out but I can't figure out how. Supposedly there is a module relay that I can swap out but I can't find that thing either. I've torn my dash apart and can not find the location of the relay. This hyperflash is really annoying. Any help would be appreciated.
- Posts: 1
- Joined: Tue Nov 13, 2018 2:16 am
- Vehicle: 2014 ford f250 6.7 super duity
I don't think you can program that out , the hyper flash is used to let you know that you have a burned out turn signal light . There is not enough current draw with LED,s so you need to install a load resister you can get from auto parts store or you can find them on Amazon there easy to install but you need to remember that they do get hot and that will stop you're hyper flash.