cruise control fiesta MK8

Any issues related to FORScan application
Post Reply
O. Van der Enden
Posts: 4
Joined: Mon Jan 07, 2019 6:01 pm
Vehicle: Ford fiesta 2009 1.6 tivct

cruise control fiesta MK8

Post by O. Van der Enden » Sat Jan 12, 2019 11:03 am

trying to change asbuild data in a 2017 fiesta mk8, for change to cruise control mode. but after hit the button write, it stucks at 15% at gives the following message:

service procedure is interrupted

i cant make any changes, how to solve this?

O. Van der Enden
Posts: 4
Joined: Mon Jan 07, 2019 6:01 pm
Vehicle: Ford fiesta 2009 1.6 tivct

Re: cruise control fiesta MK8

Post by O. Van der Enden » Sat Jan 12, 2019 11:11 am

i can't make any changes, every time forscan sais that the service procedure has been interrupted.

even in the non asbuild changes, it wont accept the changes.

O. Van der Enden
Posts: 4
Joined: Mon Jan 07, 2019 6:01 pm
Vehicle: Ford fiesta 2009 1.6 tivct

Re: cruise control fiesta MK8

Post by O. Van der Enden » Sat Jan 12, 2019 11:31 am

got figgured one thing now, on fdrs ford software, the mk8 is only by vcmm useable. i am using the vcm2 for forscan. any sollutions?

c.piano
Posts: 19
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: cruise control fiesta MK8

Post by c.piano » Tue Apr 23, 2019 1:44 pm

I'm also trying to enable this function.
But i have this problem when i go to edit in PCM.

Have you news?

FORScan
Site Admin
Posts: 2600
Joined: Fri Jun 13, 2014 2:21 am

Re: cruise control fiesta MK8

Post by FORScan » Wed Apr 24, 2019 3:14 am

Cruise control on 2017+ Fiesta/Ecosport has to be enabled in BdyCM and IPC.Latest version of FORScan have these parameters in Module Configuration function.

c.piano
Posts: 19
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: cruise control fiesta MK8

Post by c.piano » Wed Apr 24, 2019 7:14 am

FORScan wrote:
Wed Apr 24, 2019 3:14 am
Cruise control on 2017+ Fiesta/Ecosport has to be enabled in BdyCM and IPC.Latest version of FORScan have these parameters in Module Configuration function.
I’ve seen it, but when I go to edit parameter in IPC I got the same error: “the service procedure has been interrupted.” And it stuck to 12-15%.

I use .22 beta that you sent me on email.

It’s the problem my elm327 with switch?

....kekko91...
Posts: 6
Joined: Wed Apr 20, 2016 11:07 am
Vehicle: Ford fiesta mk7 1.4 TDCI

Re: cruise control fiesta MK8

Post by ....kekko91... » Mon May 06, 2019 11:34 am

Hi, any news for cruise control?

Post Reply