Ford Kuga - Enable Reversing Camera

[Kugaman]

Hi All,

For days now I have been searching the internet looking for the code to change in Forscan to enable in my Sync 2 system a third part reversing camera. For love nor money I cant find it. Before starting the project I thought I had this code but somehow have miss placed this information.

Not sure if the year of the car make any difference, but its Ford Kuga 65 Plate and Sync2 system

Please, please can anyone help me . Thank you

Simon

[semiho]

7D0-01-01 x*xx xxxx xxxx

set * to

3: With Camera No PDC (parking distance control)
9: No camera with PDC
B: With Camera with PDC

[Kugaman]

Thank you so so much I am so appreciative, what section of forscan is the code “wrench” etc

[semiho]

YW. Chip icon is for configuration and as built programming. Find and select APIM (as built) and click play.

[Kugaman]

Semiho Thank you for all your help, very much appreciated, if that works you have made my day

[VictorKitching]

7D0-01-01 x*xx xxxx xxxx

set * to

3: With Camera No PDC (parking distance control)
9: No camera with PDC
B: With Camera with PDC

I have just used the information to activate a after market camera on my 66plate Kuga.Have set the code to B ie camera with PDC but the centreline and guidelines are missing do you know the code for the activation.Thank you for the help.

[12voltWILL]

The guidelines come from the camera itself. Some aftermarket cameras have them and some don't. There is no way to activate them.

[VictorKitching]

The guidelines come from the camera itself. Some aftermarket cameras have them and some don't. There is no way to activate them.

Thanks for your reply,I have the guide lines generated from the camera the lines I"am after are the active guidelines generated by the steering angle.