TPMS readout

Car configuration discussions and experience sharing
Post Reply
mrzamboni
Posts: 1
Joined: Mon Aug 27, 2018 5:57 pm
Vehicle: Police Interceptor Utility, 3.7, 2014

TPMS readout

Post by mrzamboni » Thu Sep 13, 2018 2:18 am

Currently I only have the TPMS light that indicates that there is a low tire but does not identify which tire or show the pressure.
Is there a module setting that will enable the individual tire pressure display?
When I was connected in Forscan I saw that there are 4 individual sensors identified and showing individual pressures so I know the information exists, is there a way to enable it to show in the instrument panel display? I haven't been able to find it in any of the Forscan settings lists I have found.
The vehicle is a 2014 Police Interceptor Utility

picklepicard
Posts: 5
Joined: Tue Sep 11, 2018 12:04 am
Vehicle: escape, 2.0l turbo, 2013

Re: TPMS readout

Post by picklepicard » Sun Sep 16, 2018 11:34 pm

bump 2013 escape SEL.

Ahnabil
Posts: 4
Joined: Mon Oct 08, 2018 7:23 am
Vehicle: Explorer, 3.5 N/A, 290hp, 2015

Re: TPMS readout

Post by Ahnabil » Sat Oct 13, 2018 4:29 pm

any updates on this? did you find out how to do it or if it is possible?

Eric Ramsey
Posts: 1
Joined: Sun Jan 06, 2019 2:49 pm
Vehicle: Escape 4cyl 2.5 liter 2015

Re: TPMS readout

Post by Eric Ramsey » Sun Jan 06, 2019 4:27 pm

Also for 2015 Escape

KSblueLine
Posts: 3
Joined: Sun May 05, 2019 11:01 pm
Vehicle: 2013 Police Utility

Re: TPMS readout

Post by KSblueLine » Mon May 06, 2019 3:39 pm

id be interested as well...

lenko
Posts: 159
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2.0 Ecoboost

Re: TPMS readout

Post by lenko » Sat May 11, 2019 10:18 pm

Eric Ramsey wrote:
Sun Jan 06, 2019 4:27 pm
Also for 2015 Escape
\Escape should be ICM 720-04-01 x4xx xxxx xxxx Put a 4 where it shows and don't touch where the xs are.

Post Reply