PATS reset ford falcon

Share your FORScan experience with other users
Post Reply
DOU913
Posts: 1
Joined: Tue Sep 11, 2018 1:10 am
Vehicle: 2001 AU3xr8

PATS reset ford falcon

Post by DOU913 » Wed Sep 12, 2018 2:28 am

Hi
When I do a PATS reset it says door locks will cycle to complete successfully.

The door locks dont cycle but it says it was successful. The smart sheild hand stays solid on dash and car wont start. Could this mean a faulty BEM or PCM?

denisbrandis
Posts: 2
Joined: Sun Jan 27, 2019 7:51 am
Vehicle: au 6 cly 4l 172kw 2000

Re: PATS reset ford falcon

Post by denisbrandis » Sun Feb 03, 2019 11:49 am

Hi
Just on the off chance you reply to this . Did you ever get this problem sorted ? I have an 01 XR6 au doing the same thing .
Cheers

User avatar
Andyfocus
Posts: 388
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: PATS reset ford falcon

Post by Andyfocus » Sun Feb 03, 2019 4:53 pm

denisbrandis wrote:
Sun Feb 03, 2019 11:49 am
Hi
Just on the off chance you reply to this . Did you ever get this problem sorted ? I have an 01 XR6 au doing the same thing .
Cheers
Last active:
Wed Nov 21, 2018 2:38 am
id say hes not gonna reply lol.

run the as built data on the pcm and bem modules and try to start the car , if it starts great porblem sorted , if it comes up with pats error again retry again with programmng keys.
if you get an error while running the as built data then the module that does it could be deffective or a wiring issue so would need checking out .

also make sure your battery if well charged when doing this .
i am the same as you just a forscan user still learning .

denisbrandis
Posts: 2
Joined: Sun Jan 27, 2019 7:51 am
Vehicle: au 6 cly 4l 172kw 2000

Re: PATS reset ford falcon

Post by denisbrandis » Mon Feb 04, 2019 12:57 am

This may work if I had as built data for my au 01 xr6 .

User avatar
Andyfocus
Posts: 388
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: PATS reset ford falcon

Post by Andyfocus » Mon Feb 04, 2019 4:52 am

if only their was a way to find out where to get the as built from..........
Image
i am the same as you just a forscan user still learning .

Post Reply