Sync 2 - Rear View Camera - Guidelines do not match Steering

Share your FORScan experience with other users
Post Reply
querys
Posts: 6
Joined: Fri Aug 24, 2018 11:18 am
Vehicle: Explorer, 3.5TiVCT, 2012

Sync 2 - Rear View Camera - Guidelines do not match Steering

Post by querys » Sun Sep 09, 2018 9:14 am

Hello,

on my 2012 Explorer the Rear View Camera Guidelines on the Sync 2 screen do not match the Steering Wheel angle. This means, when the Steering ist straight, the guidelines show actually a right curve. When I streer to the left, the guideline will move and change to straight. Going further to the left, the guidelines will finally show slightly to the left.

Is there a possibility to align the steering angle with the guidelines angle? Disconnecting the battery didn't work to resolve the issue.

querys
Posts: 6
Joined: Fri Aug 24, 2018 11:18 am
Vehicle: Explorer, 3.5TiVCT, 2012

Re: Sync 2 - Rear View Camera - Guidelines do not match Steering

Post by querys » Mon Sep 10, 2018 3:51 pm

After some googling, I figured out, FORScan has a service special routine for the camera.
But unfortunately in my vehicle this routine is not present.
Anyone an idea, how to get the routine? I just downloaded the newest FORScan version on the website.

Post Reply