Turbo Position Sensor

Share your FORScan experience with other users
Post Reply
JMGJ
Posts: 1
Joined: Wed May 24, 2017 11:16 pm
Vehicle: Ford Focus Mk3, tdci 1.6, 115PS, 2011

Turbo Position Sensor

Post by JMGJ » Sat Aug 11, 2018 12:40 pm

Hi guys,
I have a ford focus 1.6 tdci mk3, and for a while I been facing some juddering issues and after check almost everything (EGR, MAF, MAP, Fuel system, DPF, etc), I pretty sure that the problem must came from the turbo position sensor assembly in the wastegate actuator.

Once that Forscan doesn’t have a way to verify the turbo position sensor on this car model, how can I easily verify if the turbo position sensor is working correctly?

In case of change the wastegate actuator by a new one, do you know if a learning procedure will be necessary?

Post Reply