Issue Injection Calibration - Service Procedure has been interrupted

Share your FORScan experience with other users
Post Reply
sumit.s
Posts: 2
Joined: Thu Apr 19, 2018 2:37 am
Vehicle: Mazda 2, Diesel 1.5, 2015

Issue Injection Calibration - Service Procedure has been interrupted

Post by sumit.s » Sat Jul 07, 2018 2:10 am

My car is Mazda DJ model, 1.5 Diesel engine. And I try to calibrate the injection.
After I have started the calibration, a car has auto acceleration two times. Then log show the service procedure has been interrupted.
And the led indicator, show engine, glow plug and main indicator.
Please help me.

Image

sumit.s
Posts: 2
Joined: Thu Apr 19, 2018 2:37 am
Vehicle: Mazda 2, Diesel 1.5, 2015

Re: Issue Injection Calibration - Service Procedure has been interrupted

Post by sumit.s » Tue Jul 10, 2018 6:08 am

I already found the root cause, it has an error because of the ECT less than 80-Celcius degree.
I try again by running the injection calibration after the ECT more than 80 Celcius and it works normally. :D

Paul_1970
Posts: 5
Joined: Wed Jul 12, 2017 3:42 pm
Vehicle: Mazda 6 Sport Tourer. MZD-CD 2.2. 180PS. 2012

Re: Issue Injection Calibration - Service Procedure has been interrupted

Post by Paul_1970 » Fri Oct 05, 2018 3:01 pm

Are you using a Bluetooth ELM or a wired one?

I have a 2012 Mazda 6. MZR-CD 2.2 diesel engine. I want to run the injector calibration service procedure but am nervous.

Post Reply