2012 Mustang Navigation in Motion

Car configuration discussions and experience sharing
cobrajet_carl
Posts: 4
Joined: Thu Aug 30, 2018 8:39 pm
Vehicle: 2012 Ford Escape Hybrid AWD

Re: 2012 Mustang Navigation in Motion

Post by cobrajet_carl » Thu Aug 30, 2018 11:46 pm

Maybe the navigation restrictions are in the ACM settings. I have a 2012 Escape Hybrid which I think has essentially the same navigation radio as a 2012 Mustang. I will be changing the settings in my ACM and I will check if there is anything related to this.

cobrajet_carl
Posts: 4
Joined: Thu Aug 30, 2018 8:39 pm
Vehicle: 2012 Ford Escape Hybrid AWD

Re: 2012 Mustang Navigation in Motion

Post by cobrajet_carl » Sun Sep 02, 2018 6:32 pm

Forscan had no info on the ACM settings for my brick nav radio, so I have started trying to decode the AS-Built data to nav radio settings. In your Mustang, can you get the diagnostics screens by pressing and holding down 3 and 6 simultaneously? On my Escape the first line of As-Built data seems to correspond to the settings that show up in the diagnostic screens, excluding the checksums. Nothing jumps out as a driving restriction but there are numerous acronyms that aren't immediately obvious, although most are. I will add some screen grabs to this message when I get a chance.
Nav_radio_config.jpg
Nav_radio_config.jpg (849.97 KiB) Viewed 131 times
Picture is just a few lines of data, 0010 0001 0100 0000 1001 0000 1011 0010 etc which matches the first line of the as-built data of 2140 90B2. A few parameters are unknown and might be related to driving restrictions.
So I'm wondering what RPA, HOV, FES and RSEM are as these are not obvious to me what they mean. OK so FES means Family Entertainment System and RSEM means Rear Seat Entertainment Module so those are out.

mturner
Posts: 9
Joined: Tue Jun 19, 2018 5:27 am
Vehicle: Mustang 5.0 2012

Re: 2012 Mustang Navigation in Motion

Post by mturner » Sat Sep 15, 2018 1:26 am

Carl,

I will see if I can get into the diagnostics screen and get back to you. Thanks for everyones effort in trying to figure this out.

Michael

mturner
Posts: 9
Joined: Tue Jun 19, 2018 5:27 am
Vehicle: Mustang 5.0 2012

Re: 2012 Mustang Navigation in Motion

Post by mturner » Sat Oct 13, 2018 12:15 am

Still looking for answers on this one. I have tried everything I can think of.

Michael

lenko
Posts: 26
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2.0 Ecoboost

Re: 2012 Mustang Navigation in Motion

Post by lenko » Sat Oct 13, 2018 11:07 pm

Here's a 2011-2014 Ford F 150. See what you can glean out of that.



https://docs.google.com/spreadsheets/d/ ... 1329872825

lenko
Posts: 26
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2.0 Ecoboost

Re: 2012 Mustang Navigation in Motion

Post by lenko » Sat Oct 13, 2018 11:28 pm

Here's another: https://docs.google.com/spreadsheets/d/ ... DJfA#gid=0

In your first post you said you enabled this in Forscan - Did you change that back? It seems the original first four codes should be either 5355 in US or 4341 in Canada. Then you change to second number to 7. What version of sync do you have exactly?

Post Reply