Enable Auto lock on Ford Fiesta MK8

Car configuration discussions and experience sharing
J_marcolino
Posts: 17
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Thu Jun 14, 2018 6:54 pm

Hello guys!
I have a Ford Fiesta MK8 1.0 Ecoboost from december 2017 (Europe) and I would like to know how can I enable auto lock function when start driving?

Already connected it to Forscan, but I don´t know where to do it..

I leave some pictures:


Image

Image

Image

Image

Thanks
João

J_marcolino
Posts: 17
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Fri Jun 15, 2018 9:14 am

Can someone help me? Experts needed!

Ptrck600
Posts: 36
Joined: Mon Mar 27, 2017 3:03 pm
Vehicle: F150/3.5/2016

Re: Enable Auto lock on Ford Fiesta MK8

Post by Ptrck600 » Fri Jun 15, 2018 7:21 pm

It’s not going to be in your IPC. It’s in the BCM

J_marcolino
Posts: 17
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Sat Jun 16, 2018 7:17 pm

Okey, thanks for thr reply.

In the BdyCM it is also as built, if I put in here what is the content of it, could you help me?

Thank you,

João

Rodrigo
Posts: 18
Joined: Mon Jul 17, 2017 9:21 pm
Vehicle: Ford Fiesta mk7

Re: Enable Auto lock on Ford Fiesta MK8

Post by Rodrigo » Tue Jun 19, 2018 12:30 pm

J_marcolino wrote:
Fri Jun 15, 2018 9:14 am
Can someone help me? Experts needed!
Here in Brazil, all cars come with automatic door locking when it reaches 20Km / h, this is already enabled and in the manual has the option to disable.
Here to program in the manual:
Turn the key but do not start the engine, press the lock button 3x on the sync panel
Turn off the key, and press the same lock button again on the sync panel
Turn on the cheve but not the match,
You will hear a beep on the panel informing you that you have entered programming mode.

Verifique no ForScan se está habilitado a função:
Automatic locking by speed: Automatic LOCK
------------------------------------
dG bOY
Fiesta mk7 - 1.6 Sigma PowerShift

------------------------------------

J_marcolino
Posts: 17
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Tue Jun 19, 2018 9:39 pm

Thanks Rodrigo, but in the Mk8 that operation doesn't work.

Tommie2110
Posts: 4
Joined: Tue Jun 19, 2018 8:57 pm
Vehicle: Ford Fiesta, 1,25 Duratec 82 PK 2009

Re: Enable Auto lock on Ford Fiesta MK8

Post by Tommie2110 » Wed Jun 20, 2018 4:32 pm

I set it on with forscan in de bcm, and then i manualy programned it as described as above.

J_marcolino
Posts: 17
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Wed Jun 20, 2018 6:13 pm

Hello. How do you enable it on BCM?
What vales do you change??
Thank you

Tommie2110
Posts: 4
Joined: Tue Jun 19, 2018 8:57 pm
Vehicle: Ford Fiesta, 1,25 Duratec 82 PK 2009

Re: Enable Auto lock on Ford Fiesta MK8

Post by Tommie2110 » Wed Jun 20, 2018 7:44 pm

Well i had a option where is was named:
Enable autolock, i look it up for you, Try to do it tomorrow

J_marcolino
Posts: 17
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Wed Jun 20, 2018 9:25 pm

Tommie your fiesta is a MK7 right?

Post Reply