Cannot configure injector

Car configuration discussions and experience sharing
Post Reply
matt1984
Posts: 1
Joined: Sat Apr 28, 2018 1:34 pm
Vehicle: Ford fiesta 1.4 tdci

Cannot configure injector

Post by matt1984 » Tue May 01, 2018 9:59 am

Hi all ive recently purchased coding tool and downloaded recent software but cannot seem to get the configuration new injectors in The service procedure log. Connects to the car and reads Dtc codes etc but wont allow me to recode a new injector i have fitted . Any help would be much appreciated

Thanks

Matt

Hella
Posts: 1
Joined: Mon Jul 02, 2018 8:13 pm
Vehicle: Mondeo, HJBA ,2.0 TDDI/TDCI, 2005

Re: Cannot configure injector

Post by Hella » Wed Jul 04, 2018 9:04 am

Im trying to help a friend with his car and i am having the same problem as you.
I can connect , read and erase codes but i can`t get the the option configuration new injectors.
Im using a old elm327 v1.5a USB scanner , may this be i issue?
I belive i have read anything after ver 1.3 shoud work?

Cheers

John
:ugeek: Norwegian Viking :ugeek:

davyt
Posts: 13
Joined: Sun Jan 29, 2017 2:36 pm
Vehicle: transit diesil 85ps 2010

Re: Cannot configure injector

Post by davyt » Thu Jul 12, 2018 5:14 pm

Have you got and applied the extended licence?

Post Reply