Power Steering Control Module U2100 Code

Car configuration discussions and experience sharing
Post Reply
xtomkx
Posts: 4
Joined: Sat Apr 07, 2018 12:18 am
Vehicle: F150 3.5T 2017

Power Steering Control Module U2100 Code

Post by xtomkx » Tue Apr 10, 2018 12:55 am

2017 F150 I'm getting the following in the PSCM.

Code: U2100 - Initial Configuration Not Complete

Additional Fault Symptom:
-Not Configured

Status:
-Dtc Present at time of request
-Malfunction Indicator Lamp is On for this DTC


Module: Power Steering Control Module

Please help.

kOtel_OK
Posts: 3
Joined: Tue Jul 10, 2018 1:29 pm
Vehicle: Ford Kuga 2.0 TDCI 180ps

Re: Power Steering Control Module U2100 Code

Post by kOtel_OK » Thu Jul 12, 2018 10:23 am

I have the same question. But for kuga 2.0 TDCI 2017. Does anybody know how to perform the initial configuration?

Ptrck600
Posts: 30
Joined: Mon Mar 27, 2017 3:03 pm
Vehicle: F150/3.5/2016

Re: Power Steering Control Module U2100 Code

Post by Ptrck600 » Thu Jul 12, 2018 3:35 pm

Received the same code when changing ACM. So I ended up putting the original asbuilt data and all was good. The code means it’s not able to be configured the way you are try to change it to.

xtomkx
Posts: 4
Joined: Sat Apr 07, 2018 12:18 am
Vehicle: F150 3.5T 2017

Re: Power Steering Control Module U2100 Code

Post by xtomkx » Thu Jul 12, 2018 4:19 pm

I went to the dealer and had them do initial configuration of the PS module. They reflashed the ecu and screwed up a bunch of things which I later corrected with forscan.

Post Reply