reset to factory default in forscan

Any issues related to FORScan application
Post Reply
pbpatel1981
Posts: 1
Joined: Tue Apr 03, 2018 9:52 pm
Vehicle: 2016 f150 XLT ECO boost

reset to factory default in forscan

Post by pbpatel1981 » Thu Apr 05, 2018 3:03 am

i made a mistake not backing up...and i need to reset couple of things how do i do it?

i try to remove dual ac control from the sync 3 screen.
also trying to remove theme and put the original one back.

2016 f150 XLT sports

wellzyseven
Posts: 1
Joined: Sat Apr 07, 2018 3:29 pm
Vehicle: F150, 5.0L V8, 2016

Re: reset to factory default in forscan

Post by wellzyseven » Sun Apr 08, 2018 2:46 pm

Which modules did you change? I have a 2016 Lariat with SYNC 3 and I can tell you what my factory settings are. No guarantees on if this will 100% fix your problem but it's worth a shot. Backup if you fix the problem!

cbrannam
Posts: 1
Joined: Tue May 08, 2018 3:02 am
Vehicle: 2016 F150 6foot bed

Re: reset to factory default in forscan

Post by cbrannam » Wed May 16, 2018 10:34 pm

Can I get your back up file. you have the same truck as me. I did a back up but can't find it.

thanks
Cbrannam1@gmail.com

Vladsky
Posts: 139
Joined: Sat Aug 13, 2016 10:50 pm
Vehicle: '15 3.5L Eco-Borscht - 409 rwhp, 526 rwtq

Re: reset to factory default in forscan

Post by Vladsky » Wed May 16, 2018 11:04 pm

cbrannam wrote:Can I get your back up file. you have the same truck as me. I did a back up but can't find it.

thanks
Cbrannam1@gmail.com
NOT a good idea. At ALL.

Obtain YOUR VIN-Specific data: http://forscan.org/forum/viewtopic.php?f=16&t=4393 ITEM #4.

Lastly - make a Test backup of a module. Go find where you stored it. Write that info down. For next time. :roll:

Vlad

Post Reply