s550 Mustang codes

Car configuration discussions and experience sharing
MalcolmV8
Posts: 6
Joined: Fri Dec 01, 2017 6:12 pm
Vehicle: ford mustang 5.0 auto 2015

s550 Mustang codes

Post by MalcolmV8 » Sat Dec 02, 2017 8:33 pm

I've searched around quite a bit and the most comprhensive list I've found was this spreadsheet

https://docs.google.com/spreadsheets/d/ ... edit#gid=0

The link was found on this forum thread

http://www.mustang6g.com/forums/showthread.php?t=61773

I tried a few of them and they worked. Some did not such as the Sync/MFT Startup Animation.

The one thing I'm really after is turning off the 3 blinks on the turn signal when you just tap it. I'd really like just a single blink. I've only found docs that show how to do that on the F150.

Does anyone know how to do this on the S550 Mustangs? Specifically I have a 2015 5.0.

Thanks
Malcolm

MalcolmV8
Posts: 6
Joined: Fri Dec 01, 2017 6:12 pm
Vehicle: ford mustang 5.0 auto 2015

Re: s550 Mustang codes

Post by MalcolmV8 » Tue Dec 05, 2017 3:38 pm

No Mustang guys out there?

Juice
Posts: 101
Joined: Sat Jan 21, 2017 4:54 pm
Vehicle: 2007 Mustang, Coyote, MagnumXL 6spd, 404RWHP/393TQ

Re: s550 Mustang codes

Post by Juice » Tue Dec 05, 2017 6:32 pm

MalcolmV8 wrote:No Mustang guys out there?
I think there are like 3 or 4 here (including you & me). lol All different years too.

MalcolmV8
Posts: 6
Joined: Fri Dec 01, 2017 6:12 pm
Vehicle: ford mustang 5.0 auto 2015

Re: s550 Mustang codes

Post by MalcolmV8 » Tue Dec 05, 2017 7:13 pm

Ah ok. Wish I knew more about figuring out the codes. Very interesting stuff.

fl3
Posts: 5
Joined: Sat Jul 08, 2017 5:48 pm
Vehicle: Ford Mustang 2016 Convertible V6 3.7l

Re: s550 Mustang codes

Post by fl3 » Sun Jan 07, 2018 11:39 am

It is the same setting as on the F150. Some guys did this already and it works.

Turn Signal Flashes (# of) SCCM 724-01-01 xxxx x*xx xx 0-3=1 flash, 4-5=2 flashes, 6-7=3 flashes, 8,9=4 flashes, A,B=5 flashes, C,D=6 flashes, E,F=7 flashes

Hope this helps.

Cheers
Falk

MalcolmV8
Posts: 6
Joined: Fri Dec 01, 2017 6:12 pm
Vehicle: ford mustang 5.0 auto 2015

Re: s550 Mustang codes

Post by MalcolmV8 » Sun Jan 07, 2018 6:48 pm

fl3 wrote:It is the same setting as on the F150. Some guys did this already and it works.

Turn Signal Flashes (# of) SCCM 724-01-01 xxxx x*xx xx 0-3=1 flash, 4-5=2 flashes, 6-7=3 flashes, 8,9=4 flashes, A,B=5 flashes, C,D=6 flashes, E,F=7 flashes

Hope this helps.

Cheers
Falk
Interesting. I'll give that a shot and report back. Thanks.

xandergomez
Posts: 3
Joined: Wed Nov 07, 2018 6:07 pm
Vehicle: 2016 Mustang 2.3L Ecoboost

Re: s550 Mustang codes

Post by xandergomez » Thu Nov 08, 2018 4:36 pm

MalcolmV8 wrote:
Sun Jan 07, 2018 6:48 pm
fl3 wrote:It is the same setting as on the F150. Some guys did this already and it works.

Turn Signal Flashes (# of) SCCM 724-01-01 xxxx x*xx xx 0-3=1 flash, 4-5=2 flashes, 6-7=3 flashes, 8,9=4 flashes, A,B=5 flashes, C,D=6 flashes, E,F=7 flashes

Hope this helps.

Cheers
Falk
Interesting. I'll give that a shot and report back. Thanks.
Have either of you guys disabled the Bass clipping on the factory radio?? Thanks!

MalcolmV8
Posts: 6
Joined: Fri Dec 01, 2017 6:12 pm
Vehicle: ford mustang 5.0 auto 2015

Re: s550 Mustang codes

Post by MalcolmV8 » Thu Nov 08, 2018 4:51 pm

I have not messed with the radio or bass clipping. Never did get the turn signals working right either. Got a few other things working which was nice.

cbeech70
Posts: 1
Joined: Thu Nov 08, 2018 10:47 pm
Vehicle: 2018 Mustang GT

Re: s550 Mustang codes

Post by cbeech70 » Sat Nov 10, 2018 10:25 pm

Has anyone enabled global window up on there s550? Also I would like to turn off the tail lights when remote start. I have been trying different things in order to enable the gear indicator all the time not just when in "S" with no luck. Any ideas????

Yansel
Posts: 1
Joined: Sat Jul 28, 2018 4:51 am
Vehicle: Ford Mustang Ecoboost 2.3L 2017

Re: s550 Mustang codes

Post by Yansel » Tue Jan 29, 2019 5:58 pm

cbeech70 wrote:
Sat Nov 10, 2018 10:25 pm
Has anyone enabled global window up on there s550? Also I would like to turn off the tail lights when remote start. I have been trying different things in order to enable the gear indicator all the time not just when in "S" with no luck. Any ideas????
Global window up is not possible.

I purchased and installed the cobb accessport v3. After the install I now have gear indicator at all times. Dont know if it cam be done with forscan

Post Reply