Reverse Mirror Tilt

Car configuration discussions and experience sharing
Post Reply
chancehenry13
Posts: 3
Joined: Fri Sep 01, 2017 9:22 pm
Vehicle: Ford F150 Platinum 2013

Reverse Mirror Tilt

Post by chancehenry13 » Sat Sep 02, 2017 3:30 pm

I have a 2015 F150 xlt and I am currently trying to enable mirror tilt. However, when i use the code provided i get an error saying i used an incompatible combination. Any help would be greatly appreciated

Livnitup
Posts: 27
Joined: Wed May 18, 2016 10:13 pm
Vehicle: 2016 F-150 Platinum 3.5L EB

Re: Reverse Mirror Tilt

Post by Livnitup » Tue Sep 05, 2017 5:27 pm

Does your truck have memory mirrors? If not, you won't be able to do the Reverse Tilt mod. Below are the values that should enable it (ignore whatever you have where the "x's" are and just write the non-x value and when FORScan gives you a message about incorrect checksum just continue with the write).

DDM 740-03-01 Fxxx xx
DDM 740-13-01 Fxxx

PDM 741-03-01 Fxxx xx
PDM 741-13-01 Fxxx

chancehenry13
Posts: 3
Joined: Fri Sep 01, 2017 9:22 pm
Vehicle: Ford F150 Platinum 2013

Re: Reverse Mirror Tilt

Post by chancehenry13 » Sat Jan 20, 2018 9:40 pm

Thanks for the reply! However, I now have a 2013 f150 platinum and haven't been able to find any codes for mirror tilt or auto fold. Do you know if the 15-18 codes work for a 2013 as well or where I can find info on this. Thanks again!

Michael W
Posts: 1
Joined: Sat Mar 17, 2018 12:35 am
Vehicle: 2018 Ford Explorer Platinum

Re: Reverse Mirror Tilt

Post by Michael W » Mon Mar 19, 2018 12:20 pm

I entered the codes and it works...somewhat. I can't get it to tilt both mirrors at the same time. Any ideas?

TCM77
Posts: 1
Joined: Sat Jan 28, 2017 7:04 pm
Vehicle: 2013 F150 FX4 5.0

Re: Reverse Mirror Tilt

Post by TCM77 » Sun May 13, 2018 9:21 pm

I have programmed my drivers seat #2 position to direct the mirrors down (a work around to accomplish this function 2013 FX4). The drivers mirror starts moving before the passenger side moves. I believe this is normal operation.

85_USMC_M998
Posts: 3
Joined: Thu Mar 08, 2018 3:41 am
Vehicle: F150, Ecoboost 3.5L, 2016

Re: Reverse Mirror Tilt

Post by 85_USMC_M998 » Mon Aug 13, 2018 12:20 am

I have a 2016 XLT Lariat with memory Mirrors/Seat. I was able to get the function to work only when I push the programmed mirror button when in reverse. I thought it would do it automatically tilt when I go into reverse. Not a big deal just misunderstood the concept I guess.

I used this:
DDM 740-03-01 Fxxx xx
DDM 740-13-01 Fxxx
PDM 741-03-01 Fxxx xx
PDM 741-13-01 Fxxx


Reverse Tilt Mirror Calibration:

1) Switch the ignition on
2) Press the memory button
3) Select the mirror you want to adjust
4) Put your vehicle into reverse (R) and adjust the mirror where desired
5) Hold the memory button for 5 seconds to save the setting
6) Press the mirror button and return to park (P)
7) Hold the memory button again

When in reverse push mirror button to tilt, Push to return it to normal position.

Post Reply