Cruise Activation BA/BF Ford Falcon & Territory

Testing new functions
KRL-94
Posts: 14
Joined: Sun May 21, 2017 10:23 am
Vehicle: 2004 ford falcon 4L inline 6 cyl

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by KRL-94 » Sat Sep 30, 2017 11:08 am

unsure if they have brought out another update since I downloaded forscan on my laptop, but it was not able to be activated with my current version 2.3.8 beta.

Bobman
Posts: 9
Joined: Sat Mar 12, 2016 9:40 am
Vehicle: Fairlane 6 cylinder 4.0 litre 2006

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by Bobman » Sat Sep 30, 2017 12:21 pm

Yeah, hopefully they can include it. I believe it would be fairly simple to include in a new update!

Bobman
Posts: 9
Joined: Sat Mar 12, 2016 9:40 am
Vehicle: Fairlane 6 cylinder 4.0 litre 2006

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by Bobman » Sat Jul 14, 2018 5:27 am

Still nothing? Thought this would have been added by now :(

Pendaws
Posts: 11
Joined: Sun Feb 12, 2017 1:08 pm
Vehicle: Ba Falcon 4.0 ltr 2003

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by Pendaws » Sun Dec 09, 2018 1:07 pm

I am still waiting for this to happen? I can't get my cruise to work still after a year. I refuse to pay a FORD dealer for them to put the scanner on my car.

Bobman
Posts: 9
Joined: Sat Mar 12, 2016 9:40 am
Vehicle: Fairlane 6 cylinder 4.0 litre 2006

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by Bobman » Tue Dec 11, 2018 1:28 pm

An update from FORScan themselves suggests they plan to develop it however the stumbling block is that there are no reliable and cheap enough J2534 adapters that would work with all the protocols and features.

Apparently to enable cruise control on the Falcon/Territory models requires a change in the PCM VID block, which requires support of Flash EEPROM Programming Signal (FEPS), which is not available on our existing ELM327 and most J2534 adapters unfortunately!

oldtinfords
Posts: 4
Joined: Sat Mar 18, 2017 2:51 am
Vehicle: BFII XR8 boss 260 5.4l 2006

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by oldtinfords » Wed Dec 26, 2018 7:28 am

Tatrix OpenPort 2.0 is a J2534 passthru interface which is recommended by PCMtec for flash tuning BA-FGX pcm's, change strategies, edit vid block etc. They are reasonably priced & work well with FORScan too. Maybe suggest the Tatrix OpenPort 2.0 as an option....people could tune with pcmtec & do module resets with FORScan.

andylena
Posts: 1
Joined: Fri Mar 15, 2019 9:17 am
Vehicle: ford falcon 4.0 2003

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by andylena » Wed Mar 20, 2019 2:55 am

Anyone knows which block needs to be flashed to get cruise control activated on Falcon BA???
Too much already said here about, however still no any useful info at all.
Can, finally, somebody to uncover the secret???

f-wolf
Posts: 400
Joined: Sat Apr 18, 2015 12:41 am
Vehicle: Ford XR6 Turbo BA MK II 6 Speed Manual

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by f-wolf » Thu Mar 21, 2019 3:16 am


AFR
Posts: 8
Joined: Sun May 29, 2016 4:37 am
Vehicle: Falcon XR6T Sprint I6T 4000cc 370Kw

Re: Cruise Activation BA/BF Ford Falcon & Territory

Post by AFR » Mon May 13, 2019 9:12 am

It need to be enabled in the PCM. In IDS is under the heading Speed. enable /disable. Its not speed limiter as some think

Post Reply