mondeo mk5 other features asbuilt

Testing new functions
Posts: 1
Joined: Sat Jun 30, 2018 8:20 pm
Vehicle: ford focus tdci

Re: mondeo mk5 other features asbuilt

Post by forscan_35 » Mon Sep 23, 2019 7:13 pm

2015 mondeo trend is not connected with the forscan program. Warning: "The vehicle cannot be connected, the vehicle does not move and the ignition must be switched on". Why could it be? ford focus connects seamlessly to the program!

Posts: 1
Joined: Wed Oct 09, 2019 10:13 am
Vehicle: Ford S-Max 2.0Ecoblue 110kw m.y.2019

Re: mondeo mk5 other features asbuilt

Post by RSWRC » Wed Oct 09, 2019 11:52 am

do you know anyone how to set up via Forscan in Ford S-max m.y 2019 2.0Ecoblue to show me the percentage of oil left to replace?

The original Ford FDRS can not teach it, only can show it using FDRS.

Thank you

;) :)

Posts: 5
Joined: Thu Oct 27, 2016 7:10 pm
Vehicle: mondeo mk5

Re: mondeo mk5 other features asbuilt

Post by oddy » Thu Oct 10, 2019 6:55 pm


I intend to activate torque steer compensation and active nibble control on mondeo mk5 , is enough to have it modified in PSCM or is required
to have it in other modules as well?
730-01-02 x*xx xxxx xxxx Torque Steer Compensation (TSC): 0=disabled, 1=enabled
730-01-01 xxxx xxx* xxxx Active Nibble Control (ANC): 0=disabled, 1=enabled

Posts: 1
Joined: Sat Feb 18, 2017 5:41 pm
Vehicle: Ford Focus RS 2016

Re: mondeo mk5 other features asbuilt

Post by ACEMajky » Thu Oct 17, 2019 8:57 pm

bigpete1983mok wrote:
Mon Jan 28, 2019 10:50 pm
Hi guys,

I own Mondeo mk5 2015 2.0 tdci 180hp, today I tried to disable and enable some features on forscan. Start stop disabled finally :D .
In what module did you change which row and value for disable start/stop? Thank you

Post Reply