Ford Galaxy 2019 - TCM for 8F40

Share your FORScan experience with other users
Post Reply
ks_aus_jucunda
Posts: 24
Joined: Mon Aug 22, 2016 12:26 pm
Vehicle: Ford Galaxy 2.0 TDCi 132 kw FL

Ford Galaxy 2019 - TCM for 8F40

Post by ks_aus_jucunda » Sun Jun 28, 2020 7:06 pm

Hi all,

Can Forscan connect to the TCM of a 2019 Ford Galaxy with automatic gearbox 8F40? GSM can be seen and is readable. Adapter is CCY from Poland with STN1170 chipset.

Thx

Klaus

FORScan
Site Admin
Posts: 2678
Joined: Fri Jun 13, 2014 2:21 am

Re: Ford Galaxy 2019 - TCM for 8F40

Post by FORScan » Wed Jul 01, 2020 6:51 am

If dedicated TCM module available, FORScan should be able to find it. But dedicated TCM module may not be available. In many cases PCM manages both engine and transmission.

ks_aus_jucunda
Posts: 24
Joined: Mon Aug 22, 2016 12:26 pm
Vehicle: Ford Galaxy 2.0 TDCi 132 kw FL

Re: Ford Galaxy 2019 - TCM for 8F40

Post by ks_aus_jucunda » Wed Jul 01, 2020 12:05 pm

Hi,

see attached the list of modules... so far so god. There are some updates pending for Galaxy, one of them is the TCM...

But if the stearing is happening via PCM etc, I understand why it cant be touched.

Thx
Attachments
tcm.JPG
tcm.JPG (142.81 KiB) Viewed 68 times

Post Reply