std ba xr6t boost

Morrismtrsport · Post by **Morrismtrsport** » Sat May 23, 2020 11:10 am

hi all Aussie ford friends. what does a std ba have for boost pressure. I ran forscan on mine a few weeks back and got 112kpa untill wheel spin just spooling with handbrake n foot brake on. wats with 28/30kpa at idle as well?

f-wolf · Post by **f-wolf** » Sat May 23, 2020 11:19 pm

Morrismtrsport wrote: ↑
Sat May 23, 2020 11:10 am
hi all Aussie ford friends. what does a std ba have for boost pressure. I ran forscan on mine a few weeks back and got 112kpa untill wheel spin just spooling with handbrake n foot brake on. wats with 28/30kpa at idle as well?

Oct 3, 2016

Given the Falcon engine's large capacity, boost pressure is kept low at 6 psi ( 42kpa )to ensure it doesn't become a grenade at high revs. Low boost also minimises turbo lag and provides a strong surge of bottom end and mid-range torque. It certainly works: peak torque of 450Nm is produced from 2000-4500rpm ...

And re " I ran forscan on mine a few weeks back and got 112kpa )

112kpa = 16.2 psi ...

Also have a read here: https://www.fordwreckers.com.au/ba-wast ... ton-broke/

Lots more here: https://www.google.com/search?q=ford+BA ... e=UTF-8

Morrismtrsport · Post by **Morrismtrsport** » Sun May 24, 2020 12:06 am

yeah I had read them awhile back. I know ba xr6t are about 5psi "stock" which don't add up to 112kpa.

Morrismtrsport · Post by **Morrismtrsport** » Mon Jul 27, 2020 6:49 am

I heard that Ford's boost pressure is anything over 100kpa. 100kpa = 0 boost

FORScan forum

std ba xr6t boost

std ba xr6t boost

Re: std ba xr6t boost

Re: std ba xr6t boost

Re: std ba xr6t boost