Cant find BCM or value entries?

Any issues related to FORScan application
Post Reply
Maxlange37
Posts: 2
Joined: Sun Mar 29, 2020 7:32 pm
Vehicle: 6.7L Ford F250 2019

Cant find BCM or value entries?

Post by Maxlange37 » Mon Mar 30, 2020 4:37 pm

Completely new to forscan and the forum. 2019 f250 SD platinum. I have been able to add seat climate controls to screen. I cannot for the life of me find the "BCM" category to do the fog/led drl switchback. On the spreadsheet the options are listed at value changes but in forscan i only see enable and disable options, no numeric values anywhere to change. What am i doing wrong?

Maxlange37
Posts: 2
Joined: Sun Mar 29, 2020 7:32 pm
Vehicle: 6.7L Ford F250 2019

Re: Cant find BCM or value entries?

Post by Maxlange37 » Mon Mar 30, 2020 6:52 pm

Also is there a way to set the turn signal to switchback with the DRL led? As in signal on, factory led drl off. Found how to switch back the turn signal with the fog lamp but not with the led

ekistol
Posts: 2
Joined: Mon Jun 29, 2020 3:55 am
Vehicle: F150, 3.5 L HO, 2019

Re: Cant find BCM or value entries?

Post by ekistol » Wed Jul 01, 2020 3:23 am

I'm also new to this but I had the same issue.
1. Make sure you have hs/ms options on your forscan harness
2. When connecting for the first time make sure you follow the directions and follow prompt to switch from hs to ms or else it wont download every module available to your app.
3. If not done correctly delete the saved profile to your car and try again
4. When running forscan make sure ignition is in on position and not running.

Good luck hope that helps.

Post Reply