Mercury Marauder RASM B2477

Car configuration discussions and experience sharing
Post Reply
Merc Marauder
Posts: 2
Joined: Wed Jan 15, 2020 9:57 pm
Vehicle: 2003 Mercury Marauder

Mercury Marauder RASM B2477

Post by Merc Marauder » Thu Jan 16, 2020 2:00 pm

Hello new to the forum. I had to replace the air ride module (RASM) due to a parasitic drain. Worked but drained my battery and a deltran charger could not keep battery charged. Replaced module but now air ride light on. Everything works and no drain but need to program module to reset light. tried to clear it but comes back on. I know I need a license. But I am unsure how to program new module.

codes are B2477 U1026

Merc Marauder
Posts: 2
Joined: Wed Jan 15, 2020 9:57 pm
Vehicle: 2003 Mercury Marauder

Re: Mercury Marauder RASM B2477

Post by Merc Marauder » Thu Jan 16, 2020 6:14 pm

ok I got it. after loading old rasm module config to new rasm module you then have to config vaps to marauder for rpm values. hope this helps another marauder owner in future.

Post Reply