Reading BdyCM

Any issues related to FORScan application
Post Reply
raytupper
Posts: 2
Joined: Fri Jan 10, 2020 1:56 am
Vehicle: Ford Focus Petrol 1.5 2019

Reading BdyCM

Post by raytupper » Wed Jan 15, 2020 8:51 pm

Hi and apologies for what's probably a dumb question.

I want to access BdyCM module configuration for the rear lights which is 726-28-01 but when I access the list it stops at 726-27-08

How do I see the higher numbers?

Thanks for any help.

Don Ridley
Posts: 133
Joined: Sun Apr 01, 2018 2:31 am
Vehicle: 2016 Transit Connect

Re: Reading BdyCM

Post by Don Ridley » Thu Jan 16, 2020 3:05 pm

Vehicle? Many vehicles use Central Configuration and there are only a few registers listed. Plus CC must be changed using menu options. See the information forum section for details.

raytupper
Posts: 2
Joined: Fri Jan 10, 2020 1:56 am
Vehicle: Ford Focus Petrol 1.5 2019

Re: Reading BdyCM

Post by raytupper » Fri Jan 17, 2020 5:01 am

It's a UK 2019 St Line-X Focus.

So I see that the problem is Central Configuration and that I probably don't have access to the BCM line to separate the stop and position signals to the rear clusters.

Is there anywhere else in FORscan that would have access to this function?

Thanks for any help.

Don Ridley
Posts: 133
Joined: Sun Apr 01, 2018 2:31 am
Vehicle: 2016 Transit Connect

Re: Reading BdyCM

Post by Don Ridley » Fri Jan 17, 2020 3:04 pm

No. BCM changes most be pre configured by Forscan. Later updates may add features. You can request changes and wait for updates.

You can edit other modules like ACM and IPC.

Post Reply