2017 f150 module issues

Any issues related to FORScan application
Post Reply
jwheaton85
Posts: 2
Joined: Tue Sep 10, 2019 10:52 pm
Vehicle: f150 5.0 v8 2017

2017 f150 module issues

Post by jwheaton85 » Wed Jan 01, 2020 9:53 pm

Question...I did the powerfold tow mirrors on xlt with replacing all the harnesses modules etc..ever since I did it, the passenger one touch up doesn’t work. Driver works fine. My question is do I need to enable one touch in forscan, or is that even a possibility? It’s driving me crazy.

f-wolf
Posts: 760
Joined: Sat Apr 18, 2015 12:41 am
Vehicle: *** Ford ***
Location: Third planet from the sun

Re: 2017 f150 module issues

Post by f-wolf » Wed Jan 01, 2020 10:46 pm


bgraversen
Posts: 2
Joined: Thu Jul 25, 2019 7:24 pm
Vehicle: Ford F150 3.5L Ecoboost 2017

Re: 2017 f150 module issues

Post by bgraversen » Wed Jul 01, 2020 3:37 am

jwheaton85 wrote:
Wed Jan 01, 2020 9:53 pm
Question...I did the powerfold tow mirrors on xlt with replacing all the harnesses modules etc..ever since I did it, the passenger one touch up doesn’t work. Driver works fine. My question is do I need to enable one touch in forscan, or is that even a possibility? It’s driving me crazy.
Did you ever get this working? I'm having the same issue after replacing my door modules. In fact the passenger door worked fine initially but the driver door didn't. Now both are not working for one touch up.

jwheaton85
Posts: 2
Joined: Tue Sep 10, 2019 10:52 pm
Vehicle: f150 5.0 v8 2017

Re: 2017 f150 module issues

Post by jwheaton85 » Wed Jul 01, 2020 12:21 pm

No it’s still doing it. I don’t understand why. I had the door module replaced twice with no luck.

bgraversen
Posts: 2
Joined: Thu Jul 25, 2019 7:24 pm
Vehicle: Ford F150 3.5L Ecoboost 2017

Re: 2017 f150 module issues

Post by bgraversen » Thu Jul 02, 2020 5:11 am

What were the part numbers of the modules you installed? You said the driver side worked but the passenger side didn't. Is that still the case?

The behavior is odd for me as I can do the window initialization procedure and if I start the window down and stop it before it is completely down the Onetouchup still works. As soon as the window goes all of the way down it stops working.

Post Reply