2018 f550 backup camera activation

Any issues related to FORScan application
Post Reply
Kartunes
Posts: 1
Joined: Fri Dec 06, 2019 6:57 pm
Vehicle: ford f550 2018

2018 f550 backup camera activation

Post by Kartunes » Fri Dec 20, 2019 9:28 pm

I have a 2018 f550 4" screen we are adding the backup camera to. I changed the camera to present but no response from the truck. and when I change it a few things happen, the 911 assist fails to work. also says im on snyc v1 but I don't know how to change it.

larryducas
Posts: 1
Joined: Fri Dec 13, 2019 11:19 pm
Vehicle: ford f150 3.5 2015

Re: 2018 f550 backup camera activation

Post by larryducas » Thu Jan 09, 2020 8:23 pm

Same here ....

jfalat
Posts: 2
Joined: Thu Dec 06, 2018 2:03 am
Vehicle: ford f150 2011 5.0

Re: 2018 f550 backup camera activation

Post by jfalat » Tue Jan 14, 2020 7:51 pm

i have enabled a few at work on 18 and 19 f550.. go into the FCDIM and enable.. should say RVC PRESENT-FNA if i remember right..

mwheeler619
Posts: 2
Joined: Wed Jan 15, 2020 9:09 pm
Vehicle: 2017 ford f250 powerstroke

Re: 2018 f550 backup camera activation

Post by mwheeler619 » Thu Jan 16, 2020 4:57 pm

Kartunes wrote:
Fri Dec 20, 2019 9:28 pm
I have a 2018 f550 4" screen we are adding the backup camera to. I changed the camera to present but no response from the truck. and when I change it a few things happen, the 911 assist fails to work. also says im on snyc v1 but I don't know how to change it.
Did you install new oem tailgate harness with the addition of a camera or did you run new wires up to the front?

jfalat
Posts: 2
Joined: Thu Dec 06, 2018 2:03 am
Vehicle: ford f150 2011 5.0

Re: 2018 f550 backup camera activation

Post by jfalat » Sun Jan 19, 2020 1:08 am

We install the cameras on chassis cabs with mechanics bodies..the camera kit comes with a harness that plugs right into the OEM plug at the end of the frame. I have never did a kit on a truck with a tail gate.

Post Reply