DRL Enabling Tips Wanted For 2011 Fusion SE

Car configuration discussions and experience sharing
Post Reply
gapi
Posts: 5
Joined: Fri Sep 13, 2019 6:07 am
Vehicle: Fusion, V6 3.0L, 240HP, 2011

DRL Enabling Tips Wanted For 2011 Fusion SE

Post by gapi » Fri Sep 13, 2019 6:56 pm

Hi Folks,

New to FORScan I have done BCM work on FCA (Dodge) using AlfaODB and know enough not to poke and hope.

We have a 2011 Fusion SE 3.0L wanting to enable the DRL's. I have FORScan Lite Android, and ODBLink MX+ Bluetooth interface.

I'm reading and searching along with posting this request. Any tips, links, anything to steer me would be great.

Thanks

denbo
Posts: 551
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: DRL Enabling Tips Wanted For 2011 Fusion SE

Post by denbo » Sat Sep 14, 2019 7:16 am

Get it on a pc win7. Get rid of android. Get the elm interface with switch on side,very important. Do not use bluetooth. Use search function and read as much as you can. Always connect a charger. These are the best tips i can give you. Good luck.

gapi
Posts: 5
Joined: Fri Sep 13, 2019 6:07 am
Vehicle: Fusion, V6 3.0L, 240HP, 2011

Re: DRL Enabling Tips Wanted For 2011 Fusion SE

Post by gapi » Sun Sep 15, 2019 3:56 am

Thanks,

Win 7 may be a problem, I don't have one.
What are they using USB or WiFi? I seen the switched interface.

I have been searching all over and seen a link to Ford's site to get the spread sheet but its a file with ".de" extension. Am I missing something?

Thanlk Again

Post Reply