Add Travel Link to '18 Escape

Car configuration discussions and experience sharing
Post Reply
jpmd70
Posts: 6
Joined: Fri Jul 12, 2019 2:29 pm
Vehicle: 2018 Escape SE w/ Nav & Sync v3.4 (19101_PRODUCT_

Add Travel Link to '18 Escape

Post by jpmd70 » Sat Jul 13, 2019 8:00 pm

Hi all,
Starting to get the hang of this software. So my 18 Escape did not come with Nav. Got a refurbished unit that has Nav but no Travel Link App. I want to activate Travel Link App!!! Which spread sheet should I be looking for? Can't find master list for Escape. Only like Explorer. Anybody that can point me in the right direction would be greatly appreciated. Also I have 2 APIM files, one with AS BUILT at the end and one without it. Which one do I need to edit since my 18 Escape did not have Nav in it fro the beginning. thanks!

jpmd70
Posts: 6
Joined: Fri Jul 12, 2019 2:29 pm
Vehicle: 2018 Escape SE w/ Nav & Sync v3.4 (19101_PRODUCT_

Re: Add Travel Link to '18 Escape

Post by jpmd70 » Sat Jul 13, 2019 8:24 pm

I got it guys. Had to turn on Data Services on the ACM then enable travel link on the APIM. So far so good. Fingers crossed!

876escaper
Posts: 1
Joined: Wed Jul 17, 2019 1:20 am
Vehicle: escape,ecoboost 1.5 i 4/181 hp,2018

Re: Add Travel Link to '18 Escape

Post by 876escaper » Sun Jul 21, 2019 2:58 am

i have n 18 escap also and im planning on doing a few stuff if you have codes or spreadsheet could you share please

jpmd70
Posts: 6
Joined: Fri Jul 12, 2019 2:29 pm
Vehicle: 2018 Escape SE w/ Nav & Sync v3.4 (19101_PRODUCT_

Re: Add Travel Link to '18 Escape

Post by jpmd70 » Sun Jul 21, 2019 3:29 pm

876escaper wrote:
Sun Jul 21, 2019 2:58 am
i have n 18 escap also and im planning on doing a few stuff if you have codes or spreadsheet could you share please
I switched out my Non-Navigation APIM unit with a Navigation unit and did the following.
My As-Built data was (non-nav unit)
APIM 7D0-01-02, xxxx xxxx xx1x went to xxxx xxxx xxAx (To get the Travel Link App to show up)
ACM 727-04-01, xxxx x2xx xxxx went to xxx x1xx xxxx (To allow the ACM unit to accept Data)
After changing these codes the SiriusXM Travel Link App showed up but did not work because of the ACM (Radio) unit.
I had to call SiriusXM and tell them that my "Dealer" (really me) replaced my unit and it is now has Navigation. They had to then over write in their system that my ESN/Radio ID is now a Navigation unit so it would be officially activated on there end.

P.S. I used this Spreadsheet https://www.icloud.com/numbers/0AtiYU-y ... _Explorers

Post Reply