Add remote using the RKE module

Car configuration discussions and experience sharing
Post Reply
stroub
Posts: 1
Joined: Wed Jun 05, 2019 8:52 pm
Vehicle: Ford Focus 1.6 Tdci 109Cv,2010

Add remote using the RKE module

Post by stroub » Sat Jul 13, 2019 6:23 pm

Hello, I own a Ford Focus 2.5 1.6 TDCI 2010. This car has a Power button to engine start (keyless). Recently I bought a new remote and I wanted to add it to the 2 remote controls that I already have.
I followed the procedure without problems but when you reach the step where Forscan ask me to press the unlock button of the new remote, after a few seconds it indicates that the programming procedure has failed and the new remote does not work (nor the buttons, nor allows the start of the engine).
My doubts are:
Does Forscan support programming remote controls using the RKE module on Focus 2.5 TDCI?
Somewhere I read that maybe we should delete the two existing keys using the function that has forscan and then program them and add the new one with the old ones all at once but I am afraid that once the old ones are deleted (they work correctly) no longer let me program them again and this would be a big problem.
Could you help me?
Thank you very much and congratulations for this fantastic software?

Post Reply