New Blind Spot Radar Sensor Config Help Needed

Car configuration discussions and experience sharing
Post Reply
JShirk1
Posts: 2
Joined: Wed Aug 21, 2019 8:20 pm
Vehicle: 2015 F150, 3.5TT Ecoboost

New Blind Spot Radar Sensor Config Help Needed

Post by JShirk1 » Sun Sep 01, 2019 6:36 pm

Good Afternoon,

I had recently replaced the passenger side Blind Spot Radar Sensor in my '15 F150 and am having difficulties programming the new sensor to my truck. I am brand new to FORScan and any help would be greatly appreciated.

Current SODR config attached for Reference.

Thank you in advance!
Justin
Attachments
SODR Snip.PNG
SODR Snip.PNG (21 KiB) Viewed 722 times

JShirk1
Posts: 2
Joined: Wed Aug 21, 2019 8:20 pm
Vehicle: 2015 F150, 3.5TT Ecoboost

Re: New Blind Spot Radar Sensor Config Help Needed

Post by JShirk1 » Thu Sep 05, 2019 1:44 pm

Bump.

qualitytruck
Posts: 1
Joined: Fri Aug 09, 2019 6:54 pm
Vehicle: taurus 3.5 2013

Re: New Blind Spot Radar Sensor Config Help Needed

Post by qualitytruck » Mon Sep 09, 2019 2:07 pm

I too am curious about solution to this issue. Hope someone who knows answers.

barathb
Posts: 8
Joined: Sun Sep 24, 2017 7:03 pm
Vehicle: Focus 1.5 TDCI Powershift 2016

Re: New Blind Spot Radar Sensor Config Help Needed

Post by barathb » Tue Sep 10, 2019 7:36 pm

Hello,

try this:

http://www.forddiy.com/2019/01/15/how-t ... f150-2015/


SODL (Side Object Detection Left):
o 7C4-01-01 9800 0065
o 7C4-02-01 5D0A 0000 0035
o 7C4-02-02 0000 14E3
o 7C4-03-01 0B09 E3
o 7C4-04-01 5F0A 39
o 7C4-05-01 1E0A 0400 00FD
o 7C4-05-02 2541 38
o 7C4-06-01 1055 826E 80A7
o 7C4-07-01 4060 080A 199E
o 7C4-07-02 0FE3
o 7C4-08-01 3146 5445 573B – VIN # Specific
o 7C4-08-02 3106 – VIN # Specific
o 7C4-09-01 4546 3946 4B2A – VIN # Specific

o 7C4-09-02 441A – VIN # Specific

o 7C4-10-01 3133 3337 34DE – VIN # Specific

o 7C4-11-01 0046 0A23 0A5A – 2017 only
o 7C4-11-02 11EF – 2017 only

o 7C4-12-01 0603 E7- 2017 only



SODR (Side Object Detection Right):
o 7C6-01-01 9800 0067
o 7C6-02-01 5D0A 0000 0037
o 7C6-02-02 0000 14E5
o 7C6-03-01 0B09 E5
o 7C6-04-01 5F0A 3B
o 7C6-05-01 1E0A 0400 00FF
o 7C6-05-02 2541 3A
o 7C6-06-01 1055 826E 80A9
o 7C6-07-01 4060 080A 19A0
o 7C6-07-02 0FE5
o 7C6-08-01 3146 5445 573D – VIN # Specific
o 7C6-08-02 3108 – VIN # Specific
o 7C6-09-01 4546 3946 4B2C – VIN # Specific
o 7C6-09-02 441C – VIN # Specific
o 7C6-10-01 3133 3337 34E0 – VIN # Specific
o 7C6-11-01 0046 0A23 0A5C – 2017 only
o 7C6-11-02 11F1 – 2017 only

7C6-12-01 0603 E9 – 2017 only

dangerous_sep
Posts: 1
Joined: Wed Nov 27, 2019 10:36 pm
Vehicle: f150 5.0 2016

Re: New Blind Spot Radar Sensor Config Help Needed

Post by dangerous_sep » Mon Jan 20, 2020 12:48 am

barathb wrote:
Tue Sep 10, 2019 7:36 pm
Hello,

try this:

http://www.forddiy.com/2019/01/15/how-t ... f150-2015/


SODL (Side Object Detection Left):
o 7C4-01-01 9800 0065
o 7C4-02-01 5D0A 0000 0035
o 7C4-02-02 0000 14E3
o 7C4-03-01 0B09 E3
o 7C4-04-01 5F0A 39
o 7C4-05-01 1E0A 0400 00FD
o 7C4-05-02 2541 38
o 7C4-06-01 1055 826E 80A7
o 7C4-07-01 4060 080A 199E
o 7C4-07-02 0FE3
o 7C4-08-01 3146 5445 573B – VIN # Specific
o 7C4-08-02 3106 – VIN # Specific
o 7C4-09-01 4546 3946 4B2A – VIN # Specific

o 7C4-09-02 441A – VIN # Specific

o 7C4-10-01 3133 3337 34DE – VIN # Specific

o 7C4-11-01 0046 0A23 0A5A – 2017 only
o 7C4-11-02 11EF – 2017 only

o 7C4-12-01 0603 E7- 2017 only



SODR (Side Object Detection Right):
o 7C6-01-01 9800 0067
o 7C6-02-01 5D0A 0000 0037
o 7C6-02-02 0000 14E5
o 7C6-03-01 0B09 E5
o 7C6-04-01 5F0A 3B
o 7C6-05-01 1E0A 0400 00FF
o 7C6-05-02 2541 3A
o 7C6-06-01 1055 826E 80A9
o 7C6-07-01 4060 080A 19A0
o 7C6-07-02 0FE5
o 7C6-08-01 3146 5445 573D – VIN # Specific
o 7C6-08-02 3108 – VIN # Specific
o 7C6-09-01 4546 3946 4B2C – VIN # Specific
o 7C6-09-02 441C – VIN # Specific
o 7C6-10-01 3133 3337 34E0 – VIN # Specific
o 7C6-11-01 0046 0A23 0A5C – 2017 only
o 7C6-11-02 11F1 – 2017 only

7C6-12-01 0603 E9 – 2017 only
I bought a used replacement from a 2017 apparently my truck is a 16 what do I do with extra values do I just "X" them out or "0"?
also this line on my Left module shows o 7C6-10-01 3133 3337 30E2 – VIN # Specific BUT since I don't have my original idk what values should go there for the SODR which currently shows o 7C6-10-01 3133 3337 32E1 – VIN # Specific

tshergi
Posts: 3
Joined: Sat Jan 18, 2020 2:52 pm
Vehicle: 2015 ford f150 lariat 3.5 ecoboost

Re: New Blind Spot Radar Sensor Config Help Needed

Post by tshergi » Wed Jan 29, 2020 1:17 am

Hi

I have 2015 f150 my driver side taillight got damage and i gor blind spot system fault message . Now i brought used taillight from ebay with blind sport module . I plug it in blind spot fault message disappeared until i put my truck into gear. As soon as i put truck in gear message pop up and driver side blind spot detection not working . I am wondering do i need to program blind spot module with my truck vin number or its something else . I checked with forscan its showing code u0501pictures attached . Please help me how can i solve it ....
Attachments
73578684-EB47-4767-A7CA-A93FB6D96D80.png
73578684-EB47-4767-A7CA-A93FB6D96D80.png (297.29 KiB) Viewed 231 times

tshergi
Posts: 3
Joined: Sat Jan 18, 2020 2:52 pm
Vehicle: 2015 ford f150 lariat 3.5 ecoboost

Re: New Blind Spot Radar Sensor Config Help Needed

Post by tshergi » Wed Jan 29, 2020 11:38 pm

Bump

Ptrck600
Posts: 95
Joined: Mon Mar 27, 2017 3:03 pm
Vehicle: F150/3.5/2016

Re: New Blind Spot Radar Sensor Config Help Needed

Post by Ptrck600 » Fri Jan 31, 2020 8:11 pm

Get your data here
https://www.motorcraftservice.com/AsBuilt

Put that in the new/used module
If there are more lines of data then what you originally had from the factory. You can put all zeros in the next lines. Doubt there is a way to downgrade the firmware to match your year.

tshergi
Posts: 3
Joined: Sat Jan 18, 2020 2:52 pm
Vehicle: 2015 ford f150 lariat 3.5 ecoboost

Re: New Blind Spot Radar Sensor Config Help Needed

Post by tshergi » Sat Feb 08, 2020 2:36 am

Thanks for help.....

Post Reply