Focus 2002 1.8 TDdi PATS programing

Car configuration discussions and experience sharing
Post Reply
LCDRDG
Posts: 10
Joined: Sat Jun 01, 2019 12:29 am
Vehicle: Focus mk1 TDdi and TDCi, Mondeo Platinium 200ch

Focus 2002 1.8 TDdi PATS programing

Post by LCDRDG » Mon Jun 03, 2019 10:35 am

Hello,
I bought an extended license of forscan to reprogram the modules following replacement of injection pump on focus 2002 TDdi. Unfortunately it does not work. It puts me "access denied" or "out code not correct", I see on the tutorial of your site that there is the possibility of using PATS LOGIN CALCULATOR V1, but I can not find anywhere. I tried login calculator on the internet which gives the code in from the code out, but it is not recognized either.

Please help me ... the car has been immobilized since ...

My forscan is version 10.3.22

LCDRDG
Posts: 10
Joined: Sat Jun 01, 2019 12:29 am
Vehicle: Focus mk1 TDdi and TDCi, Mondeo Platinium 200ch

Re: Focus 2002 1.8 TDdi PATS programing

Post by LCDRDG » Mon Jun 03, 2019 7:41 pm

Screenshots of the forscan
Attachments
Screenshot_20190603_193139.jpg
Screenshot_20190603_193139.jpg (268.93 KiB) Viewed 358 times
Screenshot_20190603_193125.jpg
Screenshot_20190603_193125.jpg (189.16 KiB) Viewed 358 times
Screenshot_20190603_193106.jpg
Screenshot_20190603_193106.jpg (239.95 KiB) Viewed 358 times
Screenshot_20190603_193027.jpg
Screenshot_20190603_193027.jpg (492.16 KiB) Viewed 358 times

LCDRDG
Posts: 10
Joined: Sat Jun 01, 2019 12:29 am
Vehicle: Focus mk1 TDdi and TDCi, Mondeo Platinium 200ch

Re: Focus 2002 1.8 TDdi PATS programing

Post by LCDRDG » Thu Jun 06, 2019 1:29 pm

No one to help me ?

LCDRDG
Posts: 10
Joined: Sat Jun 01, 2019 12:29 am
Vehicle: Focus mk1 TDdi and TDCi, Mondeo Platinium 200ch

Re: Focus 2002 1.8 TDdi PATS programing

Post by LCDRDG » Thu Jun 06, 2019 2:20 pm

I used PATS login calculator on autokeyprog. It's the same thing it does not work. Either there is a problem somewhere or it's just a circle to pocket money ...

LCDRDG
Posts: 10
Joined: Sat Jun 01, 2019 12:29 am
Vehicle: Focus mk1 TDdi and TDCi, Mondeo Platinium 200ch

Re: Focus 2002 1.8 TDdi PATS programing

Post by LCDRDG » Thu Jun 06, 2019 2:28 pm

It work now. Thanks
Last edited by LCDRDG on Thu Jun 06, 2019 10:04 pm, edited 1 time in total.

pawlo
Posts: 12
Joined: Sat Oct 01, 2016 8:07 am
Vehicle: mazda 6 2.2 dizel

Re: Focus 2002 1.8 TDdi PATS programing

Post by pawlo » Thu Jun 06, 2019 3:49 pm

tam chyba była zwłoka czasowa to inaczej się programowało podstawa dwa kluczyki

pawlo
Posts: 12
Joined: Sat Oct 01, 2016 8:07 am
Vehicle: mazda 6 2.2 dizel

Re: Focus 2002 1.8 TDdi PATS programing

Post by pawlo » Thu Jun 06, 2019 3:50 pm

there probably was a time delay otherwise the basis of two keys was programmed

Post Reply