Testing learning functions for Powershift 6DCT450 (MPS6)

Testing new functions
adixx87
Posts: 3
Joined: Sat Feb 02, 2019 2:03 pm
Vehicle: ford galaxy 2.0tdci 140ps PS 2014

Re: Testing learning functions for Powershift 6DCT450 (MPS6)

Post by adixx87 » Fri Mar 15, 2019 12:42 pm

Hi guys.

Can someone who did this procedure write down all instruction steps by steps what forscan asked for during this learning?

mondix
Posts: 3
Joined: Fri Mar 09, 2018 7:33 pm
Vehicle: mondeo mk4.5 2011 2.0tdci

Re: Testing learning functions for Powershift 6DCT450 (MPS6)

Post by mondix » Mon Jun 03, 2019 3:54 pm

Big thanks for this! that really fix my mondeo PS 1.3.5 gears clutch working. problem is that when drive stable throtle, rpms litle change. and now problem go away 👍👍

chrishatred
Posts: 1
Joined: Fri Jan 05, 2018 10:51 am
Vehicle: Focus MK3 2017

Re: Testing learning functions for Powershift 6DCT450 (MPS6)

Post by chrishatred » Mon Aug 19, 2019 9:30 pm

Do i have to hold the gas pedal the whole procedure or just at the beginning?

The instructions are a bit unclear to me...

Keithmac
Posts: 20
Joined: Fri Nov 23, 2018 6:51 pm
Vehicle: MK2 Kuga 2l dcti 163 Powershift 2013.

Re: Testing learning functions for Powershift 6DCT450 (MPS6)

Post by Keithmac » Thu Aug 22, 2019 7:24 am

Throttle full down and hard press on brake pedal for the FULL procedure. Takes a couple of minutes normally.

Post Reply