Activate guidelines on reverse camera

Car configuration discussions and experience sharing
Post Reply
Posts: 2
Joined: Sat Mar 02, 2019 12:24 am
Vehicle: Mondeo V, 2.0 TDCi 150PS, 2015

Activate guidelines on reverse camera

Post by Craigathorn » Sat Mar 02, 2019 7:09 pm

Hi all, first timer here! :D

I’ve just installed a reverse camera in my Ford Mondeo (fusion) which is “supposed” to be a replacement camera with guidelines, however the guidelines don’t seem to be appearing at all..

Is there some sort of setting I need to alter in forscan to turn these on? I’ve been told about the reverse camera calibration option but this doesn’t seem to be there and I’ve heard it’s been removed from the latest version of forscan?

Any help would be greatly appreciated!!

User avatar
Posts: 558
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Activate guidelines on reverse camera

Post by Andyfocus » Sat Mar 02, 2019 11:26 pm

i beleive someone said the lines are on the camera ? so may be worth checking out the camera
i am the same as you just a forscan user still learning .
The search function is there for a reason use it.
no you can no longer pm me with your 1 or 0 posts so dont try.

Posts: 4
Joined: Sat Apr 07, 2018 4:18 am
Vehicle: Ford Explorer Limited 2011

Re: Activate guidelines on reverse camera

Post by jorgimbo » Sun Apr 28, 2019 4:25 am

following this

Posts: 21
Joined: Tue Jul 25, 2017 9:47 pm
Vehicle: F150, 5.0L v8/285HP, 2015

Re: Activate guidelines on reverse camera

Post by 12voltWILL » Tue Apr 30, 2019 1:09 am

The guidelines do come from the camera itself. Most aftermarket cameras have a way to add or remove parking lines and also a way to reverse the image. The ones I install have a green and a white wire loop on the camera cable usually close to the camera. If the wires are connected simply cut the loop and tape them up. Sometimes they are already cut and you will just see 4 wires sticking out. Two white and two green. connect the like colored wires together to change the options. Green is usually for parking lines and the white is for normal/mirror image. There are some I've seen as well with only one of the options or none of them.

Post Reply