2008-10 F250 SuperDuty Spreadsheet...

Car configuration discussions and experience sharing
Post Reply
rixter99
Posts: 48
Joined: Mon Jan 15, 2018 4:04 am
Vehicle: 2008 F250 SD XLT 6.4L Diesel 2WD

2008-10 F250 SuperDuty Spreadsheet...

Post by rixter99 » Sat Feb 10, 2018 3:28 am

Limited, but ready...
Last edited by rixter99 on Tue Feb 13, 2018 10:27 pm, edited 1 time in total.
Cheers, Rick

Link to 2008-2010 F250 Spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

rixter99
Posts: 48
Joined: Mon Jan 15, 2018 4:04 am
Vehicle: 2008 F250 SD XLT 6.4L Diesel 2WD

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by rixter99 » Tue Feb 13, 2018 10:27 pm

Cheers, Rick

Link to 2008-2010 F250 Spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

mrglee
Posts: 6
Joined: Fri Dec 15, 2017 4:58 pm
Vehicle: 2008 F-250 6.4 Manual

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by mrglee » Thu Mar 01, 2018 3:23 am

Thank you for posting the 08-10 SD spreadsheet. I was able to enable RKE on my 08 F-250 and program a remote transmitter and also a key with built-in remote transmitter. Mine doesn't use PATS either so I just need to get the key cut and I'll be all set.

rixter99
Posts: 48
Joined: Mon Jan 15, 2018 4:04 am
Vehicle: 2008 F250 SD XLT 6.4L Diesel 2WD

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by rixter99 » Thu Mar 01, 2018 3:54 am

GREAT...Glad it helped...
Cheers, Rick

Link to 2008-2010 F250 Spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

mrglee
Posts: 6
Joined: Fri Dec 15, 2017 4:58 pm
Vehicle: 2008 F-250 6.4 Manual

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by mrglee » Fri Mar 09, 2018 3:34 am

Hello, for RKE at 726-04-01 I had programmed 02** and then programmed my fob and my key with built-in fob buttons. Its been great to have this feature enabled but the other day I happened to notice that the panic button on eiher fob doesn't do anything. I was wondering if your panic button works with RKE and, if so, what value you programmed at 726-04-01. Thanks again

rixter99
Posts: 48
Joined: Mon Jan 15, 2018 4:04 am
Vehicle: 2008 F250 SD XLT 6.4L Diesel 2WD

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by rixter99 » Fri Mar 09, 2018 5:19 am

No sir, my panic button didn't work either after enabling RKE...I'm thinking the PANIC may be part of the PATs (perimeter anti-theft?) or other Security Group feature which was not an option on my truck and since my truck doesn't use a 'chip-key', I'm hesitant to enable either of those via FORScan...Also, I don't know if the BCM/SJB module (behind passenger kick panel) enables/disables that or a separate Security 'box' is needed...
Cheers, Rick

Link to 2008-2010 F250 Spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

miller6386
Posts: 1
Joined: Sat Dec 01, 2018 12:00 am
Vehicle: F250 6.4 Diesel

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by miller6386 » Sat Dec 01, 2018 1:26 am

I know this is an older thread but I am SUPER happy!!! I was able to kill the annoying TPMS indicator AND get my remotes working I bought when I bought the truck a month ago... Had to make mine an 06 and the last 2 digits the same... It gave me a checksum issue but did program properly.... The remotes would not program before... Even better is it does driver door priority!!! Now to get rid of the Daytime Runners and I will be super happy!!

Thanks for this!!!!!

rixter99
Posts: 48
Joined: Mon Jan 15, 2018 4:04 am
Vehicle: 2008 F250 SD XLT 6.4L Diesel 2WD

Re: 2008-10 F250 SuperDuty Spreadsheet...

Post by rixter99 » Sat Dec 01, 2018 3:13 am

Your welcome...I turned my DRL 'on' using the spreadsheet...Unless your truck is built for Canada, you should be able to disable them...Good Luck...
Cheers, Rick

Link to 2008-2010 F250 Spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

Post Reply