Error P00BD Ford Kuga 163CV

Share your FORScan experience with other users
Post Reply
salvox360
Posts: 2
Joined: Thu Mar 07, 2019 4:31 pm
Vehicle: Ford Kuga 2.0 163CV 4X4 2010

Error P00BD Ford Kuga 163CV

Post by salvox360 » Wed Apr 03, 2019 11:13 am

I note this error after having exceeded 30 km / h, I have just replaced the mass air flow sensor with a new one.
how can i make adaptation for the new mass airflow sensor?

=== OBDII DTC P00BD-P ===
Code: P00BD - Circuit A mass or air flow outside the nominal range - Air flow too high

thanks

denbo
Posts: 563
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: Error P00BD Ford Kuga 163CV

Post by denbo » Wed Apr 03, 2019 8:34 pm

Airflow too high, check for un metered air. Could be a split in the intake hose or inlet manifold. BUT the new meter could be faulty.

f-wolf
Posts: 432
Joined: Sat Apr 18, 2015 12:41 am
Vehicle: Ford XR6 Turbo BA MK II 6 Speed Manual

Re: Error P00BD Ford Kuga 163CV

Post by f-wolf » Wed Apr 03, 2019 11:19 pm

Check all your Hoses between air-filter and throttle body !

salvox360
Posts: 2
Joined: Thu Mar 07, 2019 4:31 pm
Vehicle: Ford Kuga 2.0 163CV 4X4 2010

Re: Error P00BD Ford Kuga 163CV

Post by salvox360 » Fri Apr 05, 2019 9:20 am


f-wolf
Posts: 432
Joined: Sat Apr 18, 2015 12:41 am
Vehicle: Ford XR6 Turbo BA MK II 6 Speed Manual

Re: Error P00BD Ford Kuga 163CV

Post by f-wolf » Fri Apr 05, 2019 11:31 am

Nice one !!! :D

denbo
Posts: 563
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: Error P00BD Ford Kuga 163CV

Post by denbo » Fri Apr 05, 2019 8:09 pm

Yep, best diag tool out there mk1 eyeball.

Post Reply