Page 16 of 18

Re: How to program PATS using FORScan v2.3.*

Posted: Tue Mar 05, 2019 12:01 am
by fordnick
:oops: ah yeah

Re: How to program PATS using FORScan v2.3.*

Posted: Sat Mar 09, 2019 1:15 pm
by npuBaJIT
Dear All,

I tryed to find any information but couldn't. Is it possible to program key with Forscan using els27 for Mazda CX5 2018?

Regards,
Max

Re: How to program PATS using FORScan v2.3.*

Posted: Sat Mar 09, 2019 8:16 pm
by f-wolf
This vehicle requires special equipment to be connected to the vehicle to program the keyless remote.


http://www.programyourremote.com/classi ... -9163.aspx

Re: How to program PATS using FORScan v2.3.*

Posted: Mon Mar 11, 2019 6:21 pm
by vlntn
Ohhh, Forscan is fantastic! Thank you guys

Re: How to program PATS using FORScan v2.3.*

Posted: Tue Mar 12, 2019 6:34 pm
by npuBaJIT
Dear F-wolf, Could you advise which adapter I could you to programm key for my mazda? Also would be good if this adapter/scanner/programmer could be used as a scanner, like VCM2 for mazda, but a little bit cheaper :)

Best regards,
Max

Re: How to program PATS using FORScan v2.3.*

Posted: Tue Mar 12, 2019 7:54 pm
by firemanpek
Is it possible to program keys for a Ford ranger px2 2018 I would like a 3rd spare, they are around $80 from online locksmith where I have bought good keys for other cars. Thanks, Damien

Re: How to program PATS using FORScan v2.3.*

Posted: Wed Mar 13, 2019 12:03 am
by f-wolf
Note: Some vehicles, typically 2010+ models and those that use “smart” proximity keys will require professional programming by an Automotive Locksmith.


Have a look / read here:

MAZDA Key Programming Device via OBD II - 2005 - 2018 - M1
(the device includes software only for MAZDA vehicles from 2005 to 2018)

Price: 3500 EUR

https://www.vag-info.com/category/preview/FORD_MAZDA


MAZDA CX5 2017 year key programming

https://www.youtube.com/watch?v=hSosL2pHr1Q

Also:

2018 Mazda CX-5 proximity programming via Smart Pro

https://www.youtube.com/watch?v=xcdCiJIOBOY

Re: How to program PATS using FORScan v2.3.*

Posted: Wed Mar 13, 2019 12:48 am
by f-wolf
Re, program keys for a Ford ranger px2 2018


Reprogramming an un-coded new key for a current-generation PX (2007-current) Ford Ranger can be done at home if your model is an early 2007-2011 Mark 1 model. You simply get your two original keys, sit in the car with the door closed, and then turn each key to position 2 on the ignition barrel (with the red lights showing on the dash), then remove each within 10 seconds per-key. You then insert the new key, turn it to ignition position 2 and remove it within 10 seconds. You can then re-insert the key and start the car.

However, if you have a later model Ford Ranger you need to have a Ford dealer program the key to your specific car and this cannot be done at home as it involves communicating with the car’s ECU. Different dealers can charge different amounts to supply and code a key, anywhere from $350 to $1500

https://www.carsguide.com.au/car-advice ... -fob-69000


Also have a read here :?: https://www.beachautomotive.com/how-to- ... d-key-fob/

Re: How to program PATS using FORScan v2.3.*

Posted: Wed Mar 13, 2019 9:25 am
by firemanpek
Thanks f-wolf. I have done similar programing with land cruiser and camrys. I have also used forscan to program keys for bf and ba falcons. I was wondering if anyone had done it with px2 rangers. I'm guessing eventually it will be possible. I'll ask the dealer how much they charge. Thanks, Damien

Re: How to program PATS using FORScan v2.3.*

Posted: Mon Mar 18, 2019 7:55 am
by firemanpek
I just saw on the ranger mods forum that you can do it if you have 2keys already. Looks like I can, it'll save some cash, good stuff. I'll post the link but it won't work unless you get registered https://www.saeb.net/viewtopic.php?t=568