How to program PATS using FORScan v2.3.*

Share your FORScan experience with other users
sylvanus67
Posts: 6
Joined: Fri Apr 16, 2021 3:57 pm
Vehicle: Ford Galaxy 2006-2010

Re: How to program PATS using FORScan v2.3.*

Post by sylvanus67 »

tractmec wrote:
Tue May 11, 2021 5:34 pm


This is something you should probably email to Forscan with the Debug information as detailed at the contact page here: https://forscan.org/contactus.html at their email: contact@forscan.org Following the instructions under the Heading:
Providing FORScan Debug information

Afraid I have no other answers for you!
Thanks for a detailed explanation.

I have ordered an another transponder from Aliexpress, I shall try with it. And if it will be unsuccessfull again, I wil give a try for first erasing all keys.
avgs122
Posts: 1
Joined: Tue Jun 29, 2021 3:22 pm
Vehicle: Ranger 2.3L 4cyl, 2011

Re: How to program PATS using FORScan v2.3.*

Post by avgs122 »

I have this issue. Everytime I try to program a different cluster (Pats) it just says procedure interrupted. If I put the original cluster in it will let me do anything add keys, module initialization etc.

Rn everytime I do as built configuration on the used cluster it will say it was reset to as built (on forscan) but after I turn the ignition on and off it just goes back to whatever it was before using as built.

Rn with the used cluster I'm getting error B1260-FF (theft detected immobilizing engine) but with original cluster it will start right up.
This is my first post. I just don't know what to do.
Attachments
Capture (1).PNG
Capture (1).PNG (125.89 KiB) Viewed 324 times
stingone
Posts: 19
Joined: Sun Jun 11, 2017 6:13 pm
Vehicle: Ford Mondeo, 1.5 duratec, 120HP, 2016

Re: How to program PATS using FORScan v2.3.*

Post by stingone »

and_therex wrote:
Sat Dec 05, 2020 10:55 am
I bought a new remote start key for my mondeo mk5 vehicle in addition to my existing 2 original keys. Now my question is, can I encode this new key as a third key with forscan without deleting one of my other 2 devices?
Where did you bought the key.?
hunters01
Posts: 2
Joined: Fri Jul 09, 2021 1:49 pm
Vehicle: 2011 f150 lariat super crew 6.2l

Re: How to program PATS using FORScan v2.3.*

Post by hunters01 »

Does anyone know how or if forscan can program 2019 Mazda cx5 spare proximity key?
tractmec
Posts: 515
Joined: Thu May 26, 2016 11:43 pm
Vehicle: F150 5.4 Triton 2005 Expy5.4 2003 Fusion 3.0 2010

Re: How to program PATS using FORScan v2.3.*

Post by tractmec »

hunters01 wrote:
Fri Jul 30, 2021 8:50 pm
Does anyone know how or if forscan can program 2019 Mazda cx5 spare proximity key?
FORscan has had little success with proximity keys or key-less start systems specifically and Pats has been unavailable in FORscan with Ford vehicles Later than 2012-2015 Model Years due to the change to require a NASTF account login or Ford Dealer PATS login account for Outcode/Incode generation. They say they are working on a solution!

I was given to understand that Mazda and Ford ended their mutual association starting in the 2015 Model year so the Mazda situation might be different since?
Post Reply