Reset EGR after replacement

Share your FORScan experience with other users
Post Reply
rmalesa
Posts: 2
Joined: Wed Jul 04, 2018 4:41 pm
Vehicle: Ford Mondeo MK4, 2.0 tdci, 2008

Reset EGR after replacement

Post by rmalesa » Tue Aug 14, 2018 8:26 am

Hello,

I replaced EGR valve. After that I performed reset EGR valve adaptations. Next step was cleaning injectors by LIQUI MOLY LM2666 directly to injection molding. In my opinion, there's nothing changes. There's 99% of EGR_ERR and injectors balance is far from ideal. Additionaly there's black smoke from exhaust (not to much, but it is - didn't disapear). Is there problem in EGR valve adaptations or faulty injectors? Is there any procedure for checking EGR valve?
I attached screenshots (before and after EGR replacement and cleaning injectors procedure).
The attachment before_replacement_egr.jpg is no longer available
before_replacement_egr.jpg
before_replacement_egr.jpg (597.04 KiB) Viewed 308 times
Thank you in advance for your help!

rmalesa
Posts: 2
Joined: Wed Jul 04, 2018 4:41 pm
Vehicle: Ford Mondeo MK4, 2.0 tdci, 2008

Re: Reset EGR after replacement

Post by rmalesa » Thu Aug 16, 2018 8:34 pm

Here's screenshot after procedure performing. I don't know why it wasn't uploaded.

Could you help me? Anybody knows?
after.jpg
after.jpg (498.22 KiB) Viewed 274 times

Post Reply