Focus 2016 crashed and B1193 error code

Share your FORScan experience with other users
Post Reply
loscalpello
Posts: 8
Joined: Thu Oct 09, 2014 8:33 am
Vehicle: Focus 1.6 tdci , engine HHDA/90hp,2009
Location: Campobasso - Italy -

Focus 2016 crashed and B1193 error code

Post by loscalpello » Tue Feb 13, 2018 2:56 pm

Dear users of FordScan ,
I have in my garage one Focus 1.5 tdci 120 cv m.y. 2016 .
This car are crashed .
I have replaced all damage parts : Airbag drive & passenger , lateral airbag , all sensor ,safe belt ecc.ecc.
I have one registered version of Forscan .
When I try to cancel the error B1193 ,using the function - RCM Reset Frash Flag - the procedur start , but it work only few seconds and stop whit the mesage
PROCEDURE SERVICES INTERRUPTED -
On car dashboard are displayed the red safe belt / airbag alarm
Why is not pssible to cancel the B1193 error ?
I have an ELM on USB Cable whit HS-MS switch .
Thanks for all and my best regards .
Michele Reale from Campobasso - Italy -

P.S. How to do to insert an image or one screenshoot ? Thanks

denbo
Posts: 172
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: Focus 2016 crashed and B1193 error code

Post by denbo » Tue Feb 13, 2018 7:45 pm

I am presuming you are trying to reset crash data. This cannot be done by Forescan!!! You need a programmer like Carprog

loscalpello
Posts: 8
Joined: Thu Oct 09, 2014 8:33 am
Vehicle: Focus 1.6 tdci , engine HHDA/90hp,2009
Location: Campobasso - Italy -

Re: Focus 2016 crashed and B1193 error code

Post by loscalpello » Fri Feb 16, 2018 8:08 am

Finally I solved !
FORScan Team are the greater diagnostic developer team for Ford/Mazda than the other team ( even of those official )
Great work for a great results .
Thank you very much :D

amarinaro
Posts: 2
Joined: Fri Feb 02, 2018 5:08 pm
Vehicle: 2013 ford taurus lim

Re: Focus 2016 crashed and B1193 error code

Post by amarinaro » Tue Mar 20, 2018 6:12 pm

Do you mind sharing what your fix was.

Post Reply