Common principles of diagnostic with FORScan

Share your FORScan experience with other users
Beckyhebert
Posts: 3
Joined: Sun May 23, 2021 4:23 pm
Vehicle: 2002 ford f150 4.6L triton, king ranch

Re: Common principles of diagnostic with FORScan

Post by Beckyhebert »

EXCELLENT INFO!! Thank you! Becky
bekan
Posts: 2
Joined: Fri Jun 18, 2021 6:16 pm
Vehicle: 2007 Ford Focus Mk2 1.6 TDCi 110hp

Re: Common principles of diagnostic with FORScan

Post by bekan »

Guys, I'm sorry to bother you with these kind of trivial stuff but I need to ask because I haven't seen a specific answer to this. My question is how is the procedure for erasing codes on Mk2 Focus 1.6 TDCi. Does the engine need to be on or just ignition on and what do I do after I've cleared the codes - do I turn it off or start it after clearing? If anyone can post a short step by step guide I'd be very, very grateful. You're probably thinking I'm being too cautious but as it is my first time I'd like to do it properly. Cheers, take care.
S1Andyp
Posts: 1
Joined: Thu May 27, 2021 3:57 pm
Vehicle: Ford Kuga ST Line X

Re: Common principles of diagnostic with FORScan

Post by S1Andyp »

Always engine off usually and ignition on for clearing fault codes it should prompt you what to do if it doesn't erase your codes disconnect diagnostic from vehicle switch ignition off for 10 secs and then back on and reconnect diagnostic programme that's normally what I do.
Post Reply