Error on FCDIM after SD Card Nav Update

Share your FORScan experience with other users
kevinnn_s
Posts: 1
Joined: Thu May 10, 2018 11:08 am
Vehicle: Ford Focus MK3 1.6 Ecoboost 182

Re: Error on FCDIM after SD Card Nav Update

Post by kevinnn_s » Thu May 10, 2018 4:04 pm

Thank Txusman, this worked for me too, but same as you i still have the FCDIM U2101: 00-2F floating around.

I've looked at the blocks danY2014 uploaded and all are the same for me. I've also did a ECU reset for the FCDIM using FoCCCus, but that didn't help either.

In my case it's also a Focus MK3 from 2011 with BT/Voice, so no sync.

piolin49
Posts: 19
Joined: Fri Aug 26, 2016 5:14 pm
Vehicle: Ford B-Max

Re: Error on FCDIM after SD Card Nav Update

Post by piolin49 » Sun Aug 05, 2018 2:17 pm

Hi again everybody:

I tried 7A5-01-01 10BE and the result was the same as the other chap. One DTC goes bie but remains one of them: U2101:00-2F.

I tried too 7A5-01-01 1ECC (taken from a B-Max with the same FCDIM board) and the result was the same: DTC U2101:00-2F.

Anybody solve the issue?

I guess we have to fit a suitable code in BCM for example…..

Waiting your reply.

Regards

Txusman
Posts: 4
Joined: Sat Apr 15, 2017 10:49 am
Vehicle: Ford focus ecoboost 150

Re: Error on FCDIM after SD Card Nav Update

Post by Txusman » Wed Aug 22, 2018 5:24 pm

yes, that is what i need, but it is the same i have so it not worked for me.
Thankyou.

Post Reply