Activating cruise control on FF mk1,5 1,8 TDCI

Share your FORScan experience with other users
Post Reply
Atypoc
Posts: 4
Joined: Tue Mar 29, 2016 6:23 pm
Vehicle: Ford Focus 1,8 TDCI FFDA

Activating cruise control on FF mk1,5 1,8 TDCI

Post by Atypoc » Sat May 07, 2016 5:54 pm

Hello, folks!

Recently I got all what is needed to install cruise control (steering wheel buttons, wires, etc.) and installed them. When I got to the last step, which is enabling cruise control on GEM and PCM modules through ForScan (I'm using ELM327 v1,5) I found all the options I can activate, except for the cruise control...

And the question is: How to get cruise control viewed the configuration window of both PCM and GEM modules?

I noticed that in the "configurate as built" section there's some sort of code. Maybe if someone can tell me what code should I insert, so I can have the cruise-control option showed in the configuration list...

I hava Ford Focus mk 1,5 1,8 TDCI 2004

Sincerely, yours!

FORScan
Site Admin
Posts: 2553
Joined: Fri Jun 13, 2014 2:21 am

Re: Activating cruise control on FF mk1,5 1,8 TDCI

Post by FORScan » Wed May 11, 2016 12:14 pm

As far as we know, Focus Mk1.5 doesn't need cruise control to be programmed additionally. After installing all hardware components it should work. We know a 2004 European Focus with 1.8 Zetec who made this procedure successfully.

Atypoc
Posts: 4
Joined: Tue Mar 29, 2016 6:23 pm
Vehicle: Ford Focus 1,8 TDCI FFDA

Re: Activating cruise control on FF mk1,5 1,8 TDCI

Post by Atypoc » Sat Oct 01, 2016 10:03 pm

Thanks for your reply.
Yeah, I agree that gas and TD(D)I versions had no problem with cruise control being installed, as they used to have REGULAR accelerator pedal; but TD(C)I versions, though, wich have ELECTRONIC accelerator pedal have an isuue with this...
So is it possible to look for the CC function in the PCM module? It'll be nice from You to solve ths issue...

swearwolf
Posts: 3
Joined: Thu Jun 30, 2016 6:32 pm
Vehicle: cmax 1.8 petrol 2005

Re: Activating cruise control on FF mk1,5 1,8 TDCI

Post by swearwolf » Wed Oct 12, 2016 6:15 pm

i'm not sure it works on the diesels as they have a fly by wire throttle and the CC module has a cable from it to the throttle mate

Patata
Posts: 4
Joined: Fri May 05, 2017 9:20 pm
Vehicle: Ford Focus 1.8tdci 115cv, 2003

Re: Activating cruise control on FF mk1,5 1,8 TDCI

Post by Patata » Tue Jul 18, 2017 7:05 am

Any news for this? I ser some user that install the mecanic sistem in focus mk1.5, mk1 facelift, and work well. I like to enable it in electric mode and some user tell Me that only can work in focus mk2 or enable some options in Focus factory :(. Can Forscan hack it?

Regars

d54321
Posts: 10
Joined: Tue Mar 06, 2018 3:29 pm
Vehicle: Focus MK1, 1.8TDCI, 2002MY

Re: Activating cruise control on FF mk1,5 1,8 TDCI

Post by d54321 » Mon Jun 18, 2018 8:42 pm

As far as I know there is no possibility to add Cruise control on 1.8 TDCI, a german site dedicated to retrofitting parts to the Focus MK1 investigated it and reached that conclusion.

Post Reply