I also need to run this procedure, can I get the code?
Need to reprogram rear camera
-
- Posts: 1
- Joined: Sat May 23, 2020 3:20 pm
- Vehicle: 2016 Ford F550 6.7 diesel
Re: Need to reprogram rear camera
I too am needing to run this procedure for my rear camera. Would you be willing to send it to me?DnBBullard wrote: ↑Sun May 24, 2020 9:40 pmI also need to run this procedure, can I get the code?
Thank you!
Re: Need to reprogram rear camera
Hi.
Any updates to this?
Thanks.
Any updates to this?
Thanks.
Re: Need to reprogram rear camera
This function was added several years ago. There are 2 types of functions:
1. Rear camera calibration
2. Local Interconnect Network New Module Calibration
Both are used for rear view camera calibration. The functions are available for BdyCM and/or IPMB module.
If such a function is missing for your car and you believe it must be available for your car, please contact support and provide your car details (model , year).
1. Rear camera calibration
2. Local Interconnect Network New Module Calibration
Both are used for rear view camera calibration. The functions are available for BdyCM and/or IPMB module.
If such a function is missing for your car and you believe it must be available for your car, please contact support and provide your car details (model , year).
Re: Need to reprogram rear camera
My sync3 has these setting but there are no active guidelines.
- Attachments
-
- 1ACAEDF3-BE80-4885-A2F6-189A4D5BF5C2.jpeg (60.34 KiB) Viewed 952 times
Re: Need to reprogram rear camera
If I see the general BdyCM test but not specifically the BdyCM (rear camera) test, would the general BdyCM still work on the camera?FORScan wrote: ↑Mon Jun 15, 2020 1:50 amThis function was added several years ago. There are 2 types of functions:
1. Rear camera calibration
2. Local Interconnect Network New Module Calibration
Both are used for rear view camera calibration. The functions are available for BdyCM and/or IPMB module.
If such a function is missing for your car and you believe it must be available for your car, please contact support and provide your car details (model , year).
-
- Posts: 1
- Joined: Wed Jun 24, 2020 2:23 am
- Vehicle: Flex, V6, 2014
Re: Need to reprogram rear camera
I have the same issue/question as jpgray27. Not seeing a specific BdyCM rear camera test listed as others have mentioned running.
Re: Need to reprogram rear camera
My vehicle is a little different: no APIM module and no FDIM module (Ford Focus MK4 2019 - Europe), all the camera related processes are run only on BCM and ACM module.
I have the same problem, no camera guide lines and no zoom control. This happened after a SYNC system (light) (in my case stored on ACM module) update done at the the dealership, 6 months ago. They couldn't fix this yet!!! (maybe don't want to or don't know how)
I have the same DTC B115E:55.
Running Local Interconnect Network New Module Calibration, stops at 8%, no fix.
I'm thinking of visiting Ford factory in Germany, maybe they know how to fix this... it's like a 2000km trip!!!
I have the same problem, no camera guide lines and no zoom control. This happened after a SYNC system (light) (in my case stored on ACM module) update done at the the dealership, 6 months ago. They couldn't fix this yet!!! (maybe don't want to or don't know how)
I have the same DTC B115E:55.
Running Local Interconnect Network New Module Calibration, stops at 8%, no fix.
I'm thinking of visiting Ford factory in Germany, maybe they know how to fix this... it's like a 2000km trip!!!
Re: Need to reprogram rear camera
Hello,mschumiv wrote: ↑Mon Jun 29, 2020 6:01 pmMy vehicle is a little different: no APIM module and no FDIM module (Ford Focus MK4 2019 - Europe), all the camera related processes are run only on BCM and ACM module.
I have the same problem, no camera guide lines and no zoom control. This happened after a SYNC system (light) (in my case stored on ACM module) update done at the the dealership, 6 months ago. They couldn't fix this yet!!! (maybe don't want to or don't know how)
I have the same DTC B115E:55.
Running Local Interconnect Network New Module Calibration, stops at 8%, no fix.
I'm thinking of visiting Ford factory in Germany, maybe they know how to fix this... it's like a 2000km trip!!!
Did you find any solution for this as i have the same problem and also my car doesn't have APIM module.
also which configuration i've to change in BCM module for the camera?