Page 3 of 6

Re: Need to reprogram rear camera

Posted: Wed Oct 04, 2017 2:03 am
by vrdublu
I'm also having issues getting the camera calibration to work. This is on a 2011 ford edge where I replaced the camera . It's upside down and not grid lines. Every time I try to do the calibration it goes goes to 8% then craps out.9

Re: Need to reprogram rear camera

Posted: Tue Apr 10, 2018 5:42 pm
by semiho
Hi all! read that for fusion and f150 726-39-02 block is related to RVC. Looking for a way to enable RVC using forscan on Focus 2015?

Any help would be great.

Re: Need to reprogram rear camera

Posted: Wed May 02, 2018 10:31 am
by Hedemann
Anyone got this fixed? Have same problem, no guidelines and parking colour blocks on my sync3 screen, the cam works and have the parking sensors i the upper right corner. Cant find the rear camera calibration thing in the lates Forscan update?

Re: Need to reprogram rear camera

Posted: Tue May 08, 2018 4:08 pm
by rianbooyer
I have a 2012 ford edge sel and the rear camera doesn't show and has the DTC of needing calibrated but cannot find a rear camera calibration under the bodycm (i don't have the screen in front of me right now) or anything that shows how to configure the rear camera. Is there a beta version that may have this implemented for this vehicle?

Re: Need to reprogram rear camera

Posted: Wed May 09, 2018 6:37 pm
by denbo
If its aftermarket and not a ford o/e your wasting your time.

Re: Need to reprogram rear camera

Posted: Fri Aug 03, 2018 4:11 am
by chevy4wd84
rianbooyer wrote:
Tue May 08, 2018 4:08 pm
I have a 2012 ford edge sel and the rear camera doesn't show and has the DTC of needing calibrated but cannot find a rear camera calibration under the bodycm (i don't have the screen in front of me right now) or anything that shows how to configure the rear camera. Is there a beta version that may have this implemented for this vehicle?
Same here. But limited model.

Re: Need to reprogram rear camera

Posted: Wed Oct 31, 2018 11:40 pm
by Firebird968
FORScan wrote:
Sat Apr 30, 2016 3:30 am
braxx is right, a special procedure is required to initialize the camera. It is not available in FORScan yet, but we are ready to implement it for you if you can test it with your vehicle. Please see PM for details.
Do you have it setup in forscan now. I had to replace my rear camera and now getting the code b115E:55-48. I looked in the service function but do not see it for the rear camera

Re: Need to reprogram rear camera

Posted: Mon Feb 25, 2019 12:32 am
by iamsam1117
So I've got a 2015 Ford expedition and have done a sync 3 transfer. I'm looking to enable the dynamic reverse guidelines and am wondering if it's similar to a F-150. I've scoured around and am looking for what change should be made in the BCM to give this a shot at getting the feature added in.

Re: Need to reprogram rear camera

Posted: Wed May 22, 2019 8:24 pm
by rhonot
andresmorago wrote:
Fri Jun 30, 2017 3:00 am
I was able to represent my issue with the parking lines. I can see them working only for 5 seconds and just right after rebooting the apim. After that, active lines will disappear

https://youtu.be/qbMgNHXNsT8

Edit:
I ended up fixing this damn issue by performing a master reset from the apim menu. That simple it was :roll:
A forscan module reset couldn't fix the issue.
Hi bro.could u tell ur last working code.to enable active guidlines.

Re: Need to reprogram rear camera

Posted: Sun Jul 07, 2019 3:50 pm
by AshleyT19
Can anyone help with programming a new camera. Thanks people