Need to reprogram rear camera

Share your FORScan experience with other users
vrdublu
Posts: 9
Joined: Sat Nov 05, 2016 3:20 pm
Vehicle: 2011 Ford Edge Sport

Re: Need to reprogram rear camera

Post by vrdublu » Wed Oct 04, 2017 2:03 am

I'm also having issues getting the camera calibration to work. This is on a 2011 ford edge where I replaced the camera . It's upside down and not grid lines. Every time I try to do the calibration it goes goes to 8% then craps out.9

semiho
Posts: 29
Joined: Fri Jul 08, 2016 3:49 pm
Vehicle: Focus, 1.6 125hp, 2015
Location: Turkey

Re: Need to reprogram rear camera

Post by semiho » Tue Apr 10, 2018 5:42 pm

Hi all! read that for fusion and f150 726-39-02 block is related to RVC. Looking for a way to enable RVC using forscan on Focus 2015?

Any help would be great.

Hedemann
Posts: 1
Joined: Tue Jan 02, 2018 10:40 pm
Vehicle: Mondeo mk5 1.5 ecoboost 160hp 2016

Re: Need to reprogram rear camera

Post by Hedemann » Wed May 02, 2018 10:31 am

Anyone got this fixed? Have same problem, no guidelines and parking colour blocks on my sync3 screen, the cam works and have the parking sensors i the upper right corner. Cant find the rear camera calibration thing in the lates Forscan update?

rianbooyer
Posts: 2
Joined: Fri Apr 20, 2018 7:04 pm
Vehicle: 2012 ford edge

Re: Need to reprogram rear camera

Post by rianbooyer » Tue May 08, 2018 4:08 pm

I have a 2012 ford edge sel and the rear camera doesn't show and has the DTC of needing calibrated but cannot find a rear camera calibration under the bodycm (i don't have the screen in front of me right now) or anything that shows how to configure the rear camera. Is there a beta version that may have this implemented for this vehicle?

denbo
Posts: 191
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: Need to reprogram rear camera

Post by denbo » Wed May 09, 2018 6:37 pm

If its aftermarket and not a ford o/e your wasting your time.

chevy4wd84
Posts: 6
Joined: Fri Aug 03, 2018 12:04 am
Vehicle: 2017 F250 6.7

Re: Need to reprogram rear camera

Post by chevy4wd84 » Fri Aug 03, 2018 4:11 am

rianbooyer wrote:
Tue May 08, 2018 4:08 pm
I have a 2012 ford edge sel and the rear camera doesn't show and has the DTC of needing calibrated but cannot find a rear camera calibration under the bodycm (i don't have the screen in front of me right now) or anything that shows how to configure the rear camera. Is there a beta version that may have this implemented for this vehicle?
Same here. But limited model.

Post Reply