Page 1 of 1

Question about DPF Values Ford Kuga Mk1 2.0tdci 163

Posted: Thu Apr 08, 2021 11:16 am
by stef_90
Hello, does anyone know if these values are normal? There are no fault codes for DPF, and the car is running normally. Do I have to be concerned about the 300% Value of " DPF_SOOT_LD and the negative differential pressure - DP_DPF being -4 kPa ? And if yes, why is the DPF_LOAD 0%? Thanks in advance, and sorry about my bad English.

Re: Question about DPF Values Ford Kuga Mk1 2.0tdci 163

Posted: Fri Apr 09, 2021 4:43 am
by Ecmbuster
Use google to search your terms "DPF Values Ford Kuga Mk1 2.0 tdci"
Then read this:
https://www.fordownersclub.com/forums/t ... g-forscan/

Re: Question about DPF Values Ford Kuga Mk1 2.0tdci 163

Posted: Sat May 15, 2021 3:15 pm
by stef_90
Hello again, it turns out that the car's software have been remapped, and the dpf was switched off in the software. That's why it shows abnormal values. I didn't know that the owner before me have done this procedure.

Re: Question about DPF Values Ford Kuga Mk1 2.0tdci 163

Posted: Sat May 15, 2021 8:54 pm
by Ecmbuster
Interesting that you found that anomaly with the Ford.
That would also mean some hardware was replaced. Louder than normal exhaust frequency?